Plasma Machine

  • ✓ Factory Direct
  • ✓ Pre-Shipment Inspection & Testing
  • ✓ Operator Training & Protocols
  • ✓ 1-Year Warranty + Lifetime Remote Support
  • ✓ Spare Parts & Repair Support
  • ✓ OEM / Distributor Support

Professional Plasma Machines for Aesthetic Practices
Compare professional cold plasma, fusion plasma, fractional plasma, plasma shower and fibroblast plasma-pen systems for model-specific facial and aesthetic workflows. Choose from portable pens, non-ablative cold-plasma platforms, fractional roller systems and multifunction devices combining plasma with ultrasound or additional applicators.
Designed for appropriately trained aesthetic professionals, clinics, med spas, salons and equipment distributors. MOQ 1, pre-shipment inspection, operator training, one-year main-unit warranty, six-month eligible handpiece warranty and 24/7 remote technical support.
View Plasma Machines

Professional Plasma Machines for Aesthetic Practices

Plasma machine is a broad equipment category covering several different technologies. The products below include cold and fusion plasma systems, fractional plasma applicators, plasma shower devices, thermal fibroblast plasma pens and multifunction platforms combining plasma with ultrasound. These systems differ in energy generation, temperature, skin contact, treatment coverage, operator requirements and expected recovery. Buyers should compare the actual plasma source and applicators rather than relying only on words such as cold, fusion, fractional or plasma pen.

Aesthetic plasma technology uses ionized gas or a model-specific electrical discharge. It is unrelated to platelet-rich plasma, injectable PRP or blood plasma.

Choose a Plasma Machine by Technology

Cold & Fusion Plasma

Designed for broader non-contact or near-contact facial surface-care workflows with limited bulk heating when operating in a validated cold-plasma mode. View Cold Plasma Systems

Fractional Plasma

Uses a patterned pin, tip or roller applicator to distribute plasma through separated treatment points or zones. View Fractional Plasma Systems

Fibroblast Plasma Pens

Create localized electrical arcs with a thermal effect. These devices require trained operation, client screening and appropriate aftercare. View Plasma Pens

Plasma Shower Systems

Apply model-specific plasma across a broader area using a non-contact or near-contact applicator. View Plasma Shower Systems

Plasma + Ultrasound

Combine separate plasma and ultrasound handpieces within one console for multistep professional facial-care workflows. View Combination Systems

Accessories & Consumables

Includes compatible fractional rollers, needle accessories, electrodes, tips and model-specific plasma accessory sets. View Plasma Accessories

Quick Plasma Technology Comparison

Technology Application Method Thermal Profile Primary Buying Consideration
Cold Atmospheric Plasma Broad non-contact or near-contact exposure Limited bulk heating when validated for cold operation Plasma source, temperature, output and exposure controls
Fusion / Hybrid Plasma Multiple model-specific handles or modes May include cold, warm or combined operation Actual applicators and technical definition of each mode
Fractional Plasma Patterned pin, tip or roller application Depends on energy and applicator design Pin configuration, energy control and consumable costs
Fibroblast Plasma Pen Point-by-point electrical arc Localized thermal effect Training, skin selection, recovery and pigmentation risk
Plasma Shower Broad-area non-contact or near-contact application Model-specific Output, treatment distance and intended use

Terms such as cold, warm, fusion, jet, shower and fractional may be defined differently by different manufacturers. Request the current specification for the exact model before ordering.

Compare Available Plasma Machines

Plasma Machine

Showing 1–12 of 13 resultsSorted by popularity

Professional Buying Guide

How to Choose a Plasma Machine

Begin by deciding whether your business requires a non-ablative cold-plasma workflow, a fractional plasma system, a point-by-point fibroblast plasma pen or a multifunction platform. These devices require different operator skills, treatment environments and client expectations.

Identify the Plasma Source

Ask whether the system uses dielectric barrier discharge, plasma jet, arc discharge, corona discharge or another model-specific plasma-generation method.

Confirm Thermal Behavior

Determine whether the treatment is nonthermal, warm, thermally ablative or capable of operating in multiple modes. “Cold plasma” should be supported by measured temperature information.

Compare Applicators

Review plasma pens, shower heads, rollers, fractional pins, ultrasound handles and other included applicators separately.

Check Adjustable Parameters

Request available energy levels, pulse controls, frequency, treatment timers, working distance and any temperature or output monitoring.

Review Consumables

Confirm replacement tips, roller heads, derma needles, gas cartridges, electrodes, filters and any other recurring operating costs.

Verify Intended Use

Request the manual and available regulatory documentation for the exact model. Do not infer medical indications from the general word “plasma.”

Which Plasma System Matches Your Business?

Buyer Requirement Suggested Technology Main Reason Important Limitation
Non-ablative facial surface-care menu Cold atmospheric or fusion plasma Broader non-contact or near-contact workflow Claims depend on the exact output and intended use
Localized point-by-point procedures Fibroblast plasma pen Focused thermal plasma points Requires downtime, careful skin selection and advanced training
Patterned fractional treatment Fractional pin or roller plasma Covers the area through separated treatment zones Tip hygiene, consumables and energy uniformity must be verified
Multiple plasma workflows Fusion or multifunction platform Several applicators within one console Commercial mode names do not replace technical specifications
Plasma plus facial massage or product application Plasma shower + ultrasound Two separate functions for multistep protocols Ultrasound and plasma claims must remain separate

Professional Applications and Claim Boundaries

Surface-Care Protocols

Selected cold-plasma or plasma-shower modes may be incorporated into professional facial surface-care programs, subject to the exact model and intended use.

Oily or Acne-Prone Skin Care

Selected systems may support cosmetic care for oily or acne-prone skin. Do not state that a machine cures acne or destroys acne bacteria without model-specific authorization and evidence.

Skin-Rejuvenation Programs

Cold, fusion or fractional plasma may be positioned within professional appearance-focused programs when supported by the machine documentation.

Localized Plasma-Pen Procedures

Thermal plasma pens create controlled surface points and require suitable client selection, trained operation and detailed aftercare.

Fractional Surface Renewal

Fractional plasma applicators distribute treatment points across a selected area. Recovery response depends on energy, tip design and protocol.

Combination Facial Programs

Multifunction systems may combine plasma with ultrasound or other technologies, but each function should be applied according to its own instructions.

Do not apply the clinical findings of one cold-plasma device to another model. Plasma composition, energy, gas, temperature, exposure time and treatment distance can change the biological response.

Cold Plasma vs. Fibroblast Plasma Pen

Comparison Cold Atmospheric Plasma Fibroblast Plasma Pen
Primary mechanism Low-temperature ionized gas and reactive species Localized electrical arc with thermal effect
Application method Broad, non-contact or near-contact exposure Point-by-point application close to the skin
Surface injury Generally positioned as non-ablative when validated for that mode Creates intentional controlled surface injury
Expected recovery Depends on output and protocol May involve visible dots, crusting and a longer recovery period
Main buyer concern Source, gas, output and temperature verification Operator training, pigmentation, burn and scarring risks

Safety and Operator Responsibilities

Before Treatment

  • Confirm the exact plasma mode and intended application.
  • Complete client screening and informed consent.
  • Assess skin condition, pigmentation tendency and healing history.
  • Screen for active infection, open wounds and relevant contraindications.
  • Inspect the applicator, tips, electrodes, cables and emergency controls.
  • Use eye protection when required by the machine instructions.

During and After Treatment

  • Use model-specific energy, distance and exposure settings.
  • Monitor heat, discomfort and visible skin response.
  • Do not repeatedly overlap plasma points without a validated protocol.
  • Provide aftercare appropriate to ablative or non-ablative operation.
  • Document settings, applicator, area and observed response.
  • Refer unexpected burns, infection or healing problems for medical assessment.
Thermal plasma-pen procedures can involve burns, prolonged redness, swelling, crusting, post-inflammatory pigmentation, hypopigmentation, infection and scarring. The risk may be higher when unsuitable settings, poor technique or inappropriate client selection are involved.

Procedures described as eyelid lifting, lesion removal, mole removal or surgical plasma may fall within regulated medical practice. Operator eligibility and permitted claims must be checked for the destination market.

Consumables and Plasma Accessories

Consumable and replacement requirements differ between plasma pens, fractional rollers and fusion systems. Include these costs when comparing machine prices.
  • Use sterile, single-use components where required.
  • Do not reuse disposable roller or needle components between clients.
  • Confirm whether electrodes and tips require cleaning, sterilization or replacement.
  • Verify that replacement accessories match the exact machine model and software version.

Professional Cold Plasma Applications

Cold-plasma machines may support different professional skin-care workflows, but the permitted applications depend on the device design, output, documentation and local regulations.

Oily and Acne-Prone Skin Care

Selected cold-plasma modes may be incorporated into cosmetic-care protocols for oily, congested or acne-prone skin. Do not claim that the machine cures acne or permanently eliminates bacteria.

Post-Cleansing Surface Care

Cold plasma may be used as a model-specific step after cleansing or extraction when permitted by the device instructions.

Age-Management Programs

Selected systems may support appearance-focused programs for dull, rough or mature-looking skin. Avoid guaranteeing collagen production, wrinkle removal or lifting results.

Topical Product Workflows

Some protocols combine cold plasma with compatible professional topical products. Use only products and treatment sequences permitted by the manufacturer.

Cold Plasma Is Not the Same as a Plasma Pen

Feature Cold Atmospheric Plasma Fibroblast Plasma Pen
Energy delivery Low-temperature ionized-gas discharge Localized electrical arc with thermal energy
Treatment coverage Broader non-contact or near-contact exposure Point-by-point application
Surface injury May be non-ablative when validated for that operating mode Creates intentional controlled surface injury
Visible recovery Depends on output, exposure and protocol May involve visible dots, swelling and crusting
Operator requirement Professional training based on the exact device Advanced training, careful skin selection and aftercare

Do not use “cold plasma,” “fusion plasma” and “fibroblast plasma pen” interchangeably. They describe different energy-delivery methods and risk profiles.

Are These Plasma Machines Suitable for Home Use?

The machines in this category are positioned primarily for trained professional use. Thermal plasma pens, fractional applicators, high-energy systems and multifunction platforms should not be marketed as routine home skin-care devices unless the exact model is specifically designed, documented and legally permitted for consumer use. Before supplying any plasma machine for home use, confirm its intended user, operating limits, labeling, safety controls and regulatory status in the destination market.
 

What to Confirm Before Ordering

Plasma Generation Method

Request a written explanation of the discharge type, gas source, working distance and applicator design.

Measured Output

Confirm power, pulse, frequency, temperature and other relevant output data under stated test conditions.

Included Handles

Request photos and specifications for every plasma, fractional, shower, roller and ultrasound applicator.

Consumable Package

Check the quantity, lifespan and replacement cost of tips, pins, rollers, electrodes and other consumables.

Available Documentation

Request the manual, labeling, test reports and available compliance documents for the exact model and destination market.

Training and Scope

Confirm required operator training and whether the proposed services are permitted within your professional scope and local regulations.

Manufacturing and After-Sales Support

Factory Information

Learn about Mico Aes manufacturing, equipment inspection and pre-shipment testing.

Operator Training

Review available setup, operation, hygiene, parameter and maintenance training.

Warranty Information

Review the one-year main-unit warranty, six-month eligible handpiece warranty, exclusions and claim process.

Technical Support

Access 24/7 remote troubleshooting, repair coordination and spare-parts assistance.

OEM and ODM Services

Discuss model-dependent logo, interface, color, manual, packaging and accessory customization.

Frequently Asked Questions

What is a plasma beauty machine?
It is an aesthetic device that generates a model-specific ionized-gas or electrical-discharge treatment. Plasma machines include cold atmospheric systems, plasma showers, fractional applicators and thermal fibroblast pens.
Is cold plasma the same as a fibroblast plasma pen?
No. Cold atmospheric plasma is generally delivered over a broader area with limited bulk heating. A fibroblast pen creates localized thermal plasma points and intentional surface injury.
Is every plasma machine non-ablative?
No. Some cold-plasma modes may be non-ablative, while plasma pens and selected fractional modes can create controlled tissue injury. Confirm the exact operating mode.
Can a plasma machine be used for acne?
Selected systems may support professional cosmetic care for oily or acne-prone skin, but treatment claims depend on the exact device documentation. Do not claim that every plasma machine treats or cures acne.
Can plasma pens remove moles or skin lesions?
Skin lesions require appropriate medical assessment because appearance alone cannot establish whether a lesion is benign. Removal may also be restricted to licensed medical professionals. Do not offer lesion removal solely on the basis of a product name.
Does a plasma-pen procedure require downtime?
Thermal plasma-pen procedures may produce visible treatment points, redness, swelling and crusting. Recovery varies by energy, area, technique and individual healing response.
What is a fractional plasma roller?
It is a roller or multi-pin applicator that distributes treatment through multiple separated points. Confirm whether its tips are reusable or sterile single-use components.
What should I compare between cold-plasma machines?
Compare plasma source, working gas, temperature, output controls, exposure time, treatment distance, applicators, intended use and model-specific documentation.
Can I order one plasma machine?
Yes. The standard minimum order quantity is one unit. OEM or distributor projects may have different minimum quantities.
What warranty and support are included?
Mico Aes provides a one-year main-unit warranty and six-month coverage for eligible handpieces, subject to the written warranty terms. Operator training, 24/7 remote support and spare-parts assistance are also available.

Request a Plasma Machine Recommendation

Tell us whether you need cold plasma, fractional plasma, a plasma shower, a fibroblast pen or a multifunction system. Include your business type, intended services, destination country and preferred budget. Before ordering, request the current specification sheet, plasma-generation method, handle list, consumables, available documentation, voltage, warranty terms and shipping quotation for the exact model.

Get Plasma Machine Recommendations and Pricing

Shopping Cart
Scroll to Top