1470nm/980nm Endovenous Laser Treatment (EVLT) Varicose Veins Removal Machine- تدريب مجاني + بروتوكولات & مقاطع الفيديو
- إمدادات الطاقة الطبية في Meanwell
- تخصيص الشعار مجانا
- 12 شهرا ضمان + خدمة الصيانة مدى الحياة يدعم
- 7/24 اتصال خدمة
- شحن مجاني في جميع أنحاء العالم
حاسبة عائد الاستثمار المجانية
1470nm/980nm Endovenous Laser Treatment (EVLT) Varicose Veins Removal Machine
- Single or Dual wavelength options: 980nm (high hemoglobin absorption) & 1470nm (high water & hemoglobin absorption)
- Minimally invasive, outpatient procedure with fast recovery
- Radial fiber for uniform laser energy distribution and reduced vein wall damage
- Efficient vein closure with minimal pain, bruising, and complications
- Suitable for EVLT and other micro-invasive vascular surgeries
- User-friendly interface with adjustable power and pulse settings
ًالشحن مجانا + تدريب مجاني
$5،999.00 – $12,999.00نطاق السعر: من $5,999.00 خلال $12,999.00
-
دولارات الولايات المتحدة ($) - USD
-
يورو (€) - EUR
-
جنيه إسترليني (£) - GBP
وصف
Endovenous Laser Treatment (EVLT) utilizes the thermal effect of laser energy and its interaction with biological tissue to treat varicose veins. This device emits laser energy through a fiber-coupled source and delivers it precisely to the inner vascular wall via a specialized radial (ring) fiber. The result is effective closure and fibrosis of the affected vein, ultimately treating lower limb varicosities.
The laser wavelength used in this system is highly absorbed by melanin and deoxygenated hemoglobin, enabling simultaneous vaporization, coagulation, and hemostasis during the procedure.
How Endovenous Laser Treatment (EVLT) Works
EVLT is a minimally invasive laser procedure used to treat varicose veins by closing off faulty or enlarged veins from the inside using targeted thermal energy.
🔬 Step-by-Step Working Principle:
-
Vein Mapping & تحضير
The affected vein is located using ultrasound imaging. The treatment area is cleaned and numbed with local anesthesia. -
Fiber Insertion
A small puncture is made, and a thin optical fiber (usually radial type) is inserted into the diseased vein. The fiber is guided along the length of the vein under ultrasound supervision. -
Laser Activation
The laser is activated to emit energy at a specific wavelength (typically 1470 نانومتر، أو combined with 980nm), which is strongly absorbed by water and hemoglobin in the vein wall. -
Thermal Ablation
As the fiber is slowly pulled back, the laser energy heats and damages the vein wall, causing it to collapse, seal shut, and initiate a fibrosis process. -
Vein Absorption
The closed vein is gradually reabsorbed by the body, and blood is naturally rerouted to nearby healthy veins.
✅ Why EVLT Is Effective
-
دقيق & Targeted: Minimizes damage to surrounding tissue
-
الحد الأدنى الغازية: No large incisions, quick recovery
-
Dual Wavelength Option: 1470nm (water) + 980nm (hemoglobin) absorption
-
Rapid Healing: Less bruising, less pain, and quick return to normal activities
-
نتائج مثبتة: High vein closure rate and low recurrence
Advantages of 980nm Diode Laser
-
High absorption by hemoglobin: Ensures effective targeting of blood vessels.
-
Skin regeneration and collagen stimulation: Enhances skin texture and elasticity.
-
Improves microcirculation: Increases capillary permeability, activates healthier cells and tissues.
-
ATP production boost: Helps reduce pain, inflammation, and swelling, while accelerating tissue repair and wound healing.
⚠️ ملحوظة: The radial (ring) fiber is a consumable item designed for interventional procedures. It should not be reused. It cannot be cut and must either be sterilized before single use or disposed of after one use.
Advantages of 1470nm Diode Laser
The 1470nm wavelength is a new-generation semiconductor laser with unique clinical benefits:
- Dual absorption mechanism: Energy is absorbed both by hemoglobin and intracellular water.
- High cutting efficiency with minimal thermal damage: Focused energy allows rapid vaporization and decomposition of tissue within a very small target volume.
- Efficient coagulation and hemostasis: Ideal for minimally invasive procedures.
التطبيقات:
- Varicose vein closure (EVLT)
- Tumor resection
- Surgical cutting
- Prostate surgery
- Other minimally invasive procedures
Standard Accessories
-
1 × Radial Ring Fiber (single-use consumable)
The device can be configured as a single-wavelength system (1470nm only) or combined with a 980nm laser to form a dual-wavelength system, offering greater flexibility and a wider range of clinical applications.
شحن
شحن & معلومات التسليم
وقت التسليم المقدر
عادة ما يتم تسليم الطلبات داخل 3-8 أيام عمل بعد الدفع، اعتمادا على ظروف التسليم المحلية.
طرق الشحن
نحن نعمل مع رعاة الدولية الموثوقة لضمان توصيل سريع وآمن:
Express (DHL ، UPS ، FedEx ، TNT ، EMS): 5-10 أيام عمل.
ملاحظة: لا يتم تضمين التخليص الجمركي وواجبات الاستيراد. العملاء مسؤولون عن هذه التكاليف.البريد الجوي: 10-18 أيام عمل.
في معظم الحالات ، يتم تضمين التخليص الجمركي والضرائب. لأنه في بعض البلدان ، قد يكون التصريح صعبًا ، لذا يرجى التأكيد معنا قبل اختيار هذا الخيار.شحن البحر: 1-2 أشهر (قد تستغرق بعض الوجهات أطول من شهرين).
يتضمن هذا الخيار بشكل عام التخليص الجمركي وضريبة الرسوم. نوصي بشحن البحر إذا لم يكن طلبك عاجلاً وتفضل انخفاض تكلفة الشحن.
رسوم الشحن
يتم حساب تكلفة الشحن بناءً على الوزن والأبعاد والوجهة من طلبك.
التتبع
أ عدد تتبع سيتم تقديمه بمجرد شحن طلبك.
سيتم تقديم رقم التتبع لك بمجرد شحنه. قراءة كاملة سياسة الشحن.
نقدم ضمان استرداد الأموال لمدة 30 يومًا لجميع المنتجات، اقرأ كاملاً سياسة استرداد الأموال.
مصنع
شركة Mico Aes Technology Co.Ltd، ومقرها الصين، قوانغتشو، لدينا 5 مصانع بخطوط إنتاج مختلفة، واحد لآلات الليزر ذات الصمام الثنائي، والثاني لآلات الهايفو، والثالث لأجهزة الوجه المائية، والرابع لمعدات emszero، والخامس لآلات co2 ماكينات الليزر والبيكو ليزر. نحن نراقب بعناية عمليات التصنيع ونقوم بفحص مراقبة الجودة لكل آلة قبل إرسالها إلى شركة الشحن. يقوم موظفو Mico Aes أيضًا بزيارة كل مصنع بشكل متكرر لإجراء فحوصات عشوائية للجودة لضمان استيفاء معاييرنا المتميزة. تعرف على المزيد من التفاصيل >>>
تصنيع & ضبط الجودة
- عملية التصنيع الصارمة: يتم مراقبة وفحص كل آلة بعناية.
- فحص شخصي 100%: يخضع كل منتج لفحوصات الجودة الشاملة قبل الشحن.
- التفتيش العشوائي على المصانع: يقوم موظفو Mico Aes بزيارات متكررة للموقع لضمان الجودة.
أجزاء عالية الجودة
- المصادر العالمية: مكونات من موردين موثوقين في الولايات المتحدة الأمريكية وألمانيا واليابان وكوريا.
- التصنيع الداخلي: يتم إنتاج بعض الأجزاء في مصانع Mico Aes لتلبية معايير الجودة العالية.
شهادة
لدينا شهادات CE، Rohs، FCC، وFDA، وبراءات الاختراع للتصميم. شهادات كاملة

ضمان
تلتزم شركة Mico Aes بتوفير أفضل معدات الصالون. سواء كان الأمر مخصصًا لشركتك أو لاستخدامك الشخصي، فأنت بحاجة إلى أن تعمل أجهزتك بفعالية وموثوقية لسنوات قادمة.
- فترة الضمان للجهاز الرئيسي: سنة واحدة من تاريخ التسليم
- فترة ضمان قطع الغيار: 3 أشهر من تاريخ التسليم
- دعم الصيانة مدى الحياة بعد فترة الضمان: ستواصل شركة Mico Aes تقديم المشورة الفنية وقطع الغيار مجانًا بسعر التكلفة.
تمرين
لضمان تحقيق أفضل النتائج لعملائك، نحن نقدم الوصول الكامل إلى مجموعة واسعة من الموارد التعليمية، مشتمل أدلة المستخدم, فيديوهات العلاج, البروتوكولات، و مواد تسويقية. تم تصميم هذه الموارد لمساعدتك على فهم معداتك الجديدة والترويج لخدماتك بشكل فعال.
نقدم أيضًا شهادة مجانية (شهادة يمكنك تعليقها على الحائط).
اتصل بنا بعد أن تتلقى التسليم الخاص بك لتحديد موعد الجلسة التدريبية الخاصة بك عن طريق Zoom أو FaceTime.
اطرح سؤالاً حول هذا المنتج في أي وقت.
طريقة الدفع
يمكننا قبول الدفع من خلال Paypal (أقل من 1000 دولار أمريكي)، ويسترن يونيون, غرام المال، و التحويل البنكي T/T.
مراجعة
اقرأ جميع تقييمات Mico Aes التي تم التحقق منها
يمكنك مشاهدة المزيد من التقييمات هنا: https://micoaes.com/testimonials/









المراجعات
لا توجد تعليقات حتى الآن