Treatment Equipment and parameters: PicoSure alexandrite laser (Cynosure, USA, wavelength 755 nm), and PicoWay Nd:YAG dual-wavelength laser (Syneron-Candela, USA, 532 nm band selected). Treatment parameters for 77 tattoos were determined based on factors such as patient age, tattoo color, skin type, and actual treatment endpoint response. Treatment intervals were 2-3 months, with routine follow-up for 3 months after treatment.
How to Choose the Best Treatment Method Based on Tattoo Color?
- Dark Blue or Black Tattoos: Dark blue and black tattoos are generally most sensitive to laser treatment. For patients with light skin tones, Q-switched and picosecond 755nm alexandrite laser, Q-switched 694nm ruby laser, and Q-switched and picosecond 1064nm Nd: YAG laser can all effectively remove them. For patients with darker skin tones, choosing a longer wavelength laser (picosecond 755nm, 1064nm Nd: YAG) is safer.
- Red and Yellow Tattoos: While the optimal wavelength for removing these types of tattoos is picosecond or Q-switched 532nm frequency-doubled Nd: YAG laser, caution should be exercised when using the 532nm wavelength for patients with darker skin tones. This is because shorter wavelengths result in greater melanin absorption by the epidermis, increasing the risk of post-treatment pigmentation changes. However, a few studies suggest that under appropriate treatment parameters, picosecond frequency-doubled 532nm Nd: YAG laser may be safe for red and yellow tattoos. 3. Green Tattoos: The Q-switched 694nm ruby laser is considered the preferred wavelength for treating green tattoos, but those with darker skin should choose carefully. Q-switched and picosecond 755nm alexandrite lasers are also very effective for removing green tattoos.
- Colored Tattoos: When treating tattoos containing multiple colors, multiple lasers are usually needed to achieve the best removal results. Black outlines can be treated with a Q-switched or picosecond 1064nm Nd :YAG laser. After removing the black pigment, Q-switched or picosecond 532nm frequency-doubled Nd: YAG lasers can be used to treat red or yellow ink within the tattoo. If the tattoo ink is green, a Q-switched 694nm ruby laser, a Q-switched laser, or a picosecond 755nm alexandrite laser can be used. Additionally, a 650nm Q-switched Nd: YAG laser with a dye handpiece can also be used. If the tattoo ink shows a noticeable bleaching reaction immediately after treatment, the laser wavelength will usually be effective in lightening this color.
Summary: 1. Based on the theory of selective photothermolysis, 755nm and 1064nm lasers are typically used to treat black, blue, and green tattoos; 532nm picosecond lasers are used to treat purple, red, yellow, and orange tattoos. Q-switched lasers are generally difficult to remove yellow tattoos, but 532nm picosecond laser treatment has good results. 2. For tattoos suspected of containing titanium dioxide or iron oxide dyes (tattoos showing white, brown, tan, or rust-colored areas), pulsed laser treatment carries a risk of darkening. For tattoo patients with dark skin, lower energy density and/or longer laser wavelengths (e.g., 1064nm) should be used to reduce the risk of pigment depigmentation.
Picosecond Laser Tattoo Removal Principle
Picosecond lasers refer to lasers with output pulse widths in the picosecond range, primarily including three operating wavelengths: 755 nm, 532 nm, and 1064 nm. Due to their extremely short pulse width, picosecond lasers can achieve extremely high peak power instantaneously, thereby producing a photoacoustic (or photomechanical) effect on the target chromophore, shattering the tattoo dye particles or melanin particles into smaller pieces that are more easily cleared by pigment-loving cells such as macrophages, resulting in a milder inflammatory response. Therefore, picosecond lasers are more effective and have fewer adverse reactions than Q-switched lasers in treating tattoos and most hyperpigmentation disorders.
🟩parameters
Название продукта 🦋 Портативная пикосекундная машина
Модель: TQ-Portable-02
Лазерный тип: nd: Q-переключенный лазер Q-переключатель
Экран: 10,4-дюймовый сенсорный экран
Диапазон регулировки энергии:
1064 нм (0,4-2,0J);
785 нм (0,4-2,0J);
532 нм (0,4-2,0 Дж) регулируется
Выходная частота: 1-10 Гц регулируется
Выходное пятно: 2-10 мм регулируется
Легкая направляющая рука: 7-младший легкий рука
Система охлаждения: воздушное охлаждение + конденсатор
🟧details
① Три интерфейсы на необязательные
②internal Структурная диаграмма
Одноканальный/двухканальный выбор конфигурации
Слева: ①standard одноканальный (одиночный свет и одиночный стержень)
Справа: ③dual Channel (двойной свет и двойные стержни)
Упаковка :
Вес хоста: 30 кг
Размер хоста: 693438 см
Внешняя упаковка: упаковка с воздушной коробкой (один кусок за билет)
Размер упаковки: 854062 см
Вес упаковки: 49 кг
