Emsculpt vs. CoolSculpting: Welches ist am besten für Ihr Schönheitsgeschäft?

Emsculpt vs Coolsculpting, was die richtige Wahl ist (1)

Emsculpt and CoolSculpting are two popular non-invasive body contouring technologies, each using different mechanisms to achieve fat reduction and body sculpting. Below is a detailed comparison of these two technologies:

1. Arbeitsprinzipien

  • Emsculpt: Uses High-Intensity Focused Electromagnetic (HIFEM) technology and Radio Frequency (RF) energy to induce supramaximal muscle contractions, enhancing muscle mass and tone while heating the subcutaneous fat layer to promote fat cell destruction and skin tightening.
  • CoolSculpting: Uses Cryolipolysis technology, which freezes targeted fat cells, causing them to die naturally and be metabolized by the body, resulting in fat reduction.

2. Zielgebiete

  • Emsculpt: Primarily used to enhance muscle mass and tone, commonly applied to areas such as the abdomen, buttocks, arms, thighs, and calves.
  • CoolSculpting: Primarily targets stubborn fat and is suitable for areas like the abdomen, waist, thighs, under the chin, upper arms, back, and beneath the buttocks.

3. Behandlungsdauer und Häufigkeit

  • Emsculpt: Each treatment lasts around 30 minutes and typically requires four sessions spaced 5–10 days apart.
  • CoolSculpting: Treatment time varies depending on the area being treated, typically ranging from 35 minutes to an hour. The number of sessions required depends on the individual’s goals and fat volume.

4. Results and Effectiveness

  • Emsculpt: Initial results can be seen within a few weeks, with optimal results usually appearing around three months post-treatment. It not only reduces fat but also increases muscle mass, making the body more toned and sculpted.
  • CoolSculpting: Results typically begin to show after three weeks, with optimal results reached around two months. The treatment focuses on fat reduction, with no direct impact on muscle enhancement.

5. Sicherheit und Nebenwirkungen

  • Emsculpt: The side effects are minimal, with the most common being muscle soreness after the treatment, similar to the discomfort experienced after intense exercise. There is no recovery time required.
  • CoolSculpting: May cause temporary redness, bruising, swelling, and numbness. There is no significant recovery time, though some patients may experience discomfort or stronger sensations post-treatment.

6. Kosten

  • Emsculpt: Because it provides dual benefits (fat reduction and muscle building), it is generally more expensive, with each treatment session costing between $750 and $1,000.
  • CoolSculpting: Relatively more affordable, with sessions costing between $600 and $1,200 depending on the treatment area and the number of sessions required.

Choosing between Emsculpt Und CoolSculpting depends on personal goals and needs. If you want to simultaneously reduce fat and enhance muscle tone, Emsculpt may be the better choice. However, if your primary focus is fat reduction without affecting muscle quality, CoolSculpting might be a better option.


Long-Term Effects and Maintenance of Emsculpt and CoolSculpting

Emsculpt

Long-term Effects:

  • The results are long-lasting but require periodic maintenance. Clinical studies indicate that the effects can last 3 to 6 months after treatment.
  • Muscle-building effects can last for more than six months, and most patients remain satisfied with the results even a year after the treatment.

Wartung:

  • To maintain the effects, it is recommended to have a maintenance treatment every six months.
  • A monthly booster plan is available at a discounted rate, allowing patients to maintain results with one treatment per month.

CoolSculpting

Long-term Effects:

  • CoolSculpting results are permanent since the treated fat cells are permanently eliminated.
  • However, to maintain results, patients need to adopt a healthy lifestyle, including balanced diet and regular exercise.

Wartung:

  • The effectiveness of CoolSculpting depends on lifestyle and weight management. If weight is gained, remaining fat cells may expand, potentially diminishing the treatment results.

Recent Technological Advances in Emsculpt and CoolSculpting

CoolSculpting Elite:

CoolSculpting Elite machine
  • CoolSculpting Elite is an enhanced version of the original CoolSculpting technology. It uses new applicators that provide more precise treatment of the target areas, improving both treatment efficiency and patient comfort.
  • The new applicators are larger, enabling the treatment of more body fat in a standard session, thus speeding up the fat breakdown process.
  • CoolSculpting Elite is FDA-approved for use on nine visible body areas to treat fat bulges.

Emsculpt NEO:

emsculpt neo machine
  • Emsculpt NEO combines High-Intensity Focused Electromagnetic (HIFEM) energy with Radio Frequency (RF) technology for non-invasive body shaping. This technology enables both muscle growth and fat burning simultaneously.
  • Emsculpt NEO works by using HIFEM+ and RF technology to activate and warm the muscles, causing them to contract and thus enhancing sculpting and toning effects.
  • Optimal results are typically seen after six 30-minute sessions, spaced 5–10 days apart.
  • Emsculpt NEO is suitable for people with a BMI of up to 35 and can effectively sculpt muscles regardless of fat volume.

Combination of Treatments:

  • Emsculpt NEO and CoolSculpting can be combined to maximize both fat burning and muscle growth. This combination provides a comprehensive body sculpting solution.

Scientific Research Supporting the Safety and Effectiveness of Emsculpt and CoolSculpting

Emsculpt

  • FDA -Genehmigung: Emsculpt NEO is FDA-approved for non-invasive body shaping, ensuring that it meets rigorous safety and efficacy standards.
  • Klinische Studien: Numerous clinical studies validate Emsculpt NEO’s safety and effectiveness. Studies using MRI, CT, ultrasound, and histology have demonstrated significant improvements in muscle mass and fat reduction with minimal side effects.
  • Study Results: For example, a study published in the Journal of Cosmetic Dermatology evaluated 22 patients over a 3-month follow-up, showing an average reduction of 2 inches in waist circumference, with no reported adverse effects.
  • Additional Studies: Emsculpt has been validated in over 15 clinical studies, showing its effectiveness in muscle growth and fat reduction. Additionally, five specific abdominal studies have shown a 19% reduction in subcutaneous abdominal fat, a 16% increase in muscle mass, and a 4.4 cm reduction in waist circumference.

CoolSculpting

  • FDA -Genehmigung: CoolSculpting® has been FDA-approved for non-invasive fat reduction.
  • Klinischer Beweis: CoolSculpting® has over 60 peer-reviewed clinical studies and abstracts proving its safety and effectiveness, supported by millions of treatments performed globally.
  • Historical Background: CoolSculpting® originated from the concept ofcold-induced fat necrosisfirst described in 1970. In 1999, two Harvard scientists developed an innovative, safe method to freeze fat cells, and in 2009, it received FDA approval.

Combined Emsculpting and Coolsculpting Machine

A combined Emsculpt and CoolSculpting machine would offer a comprehensive solution for body contouring, addressing both Fettreduktion Und Muskelaufbau in one session. Combining these two technologies provides a more holistic approach to body sculpting, making it an appealing option for both beauty clinics and consumers looking for optimal results.

Combined Emsculpting and Coolsculpting Machine
BesonderheitEmsculptCoolSculpting
TechnologieHochintensive fokussierte Elektromagnetik (HIFEM) & RFKryolipolyse (Fettfrieren)
HauptfokusBuilds muscle, burns fatReduces fat
ZielgebieteAbdomen, buttocks, arms, thighs, calvesAbdomen, waist, thighs, under the chin, upper arms, back, beneath the buttocks
Behandlungsdauer~30 minutes per session35–60 minutes per session
Anzahl der SitzungenTypically 4 sessions, 5–10 days apartDepends on goals; typically 1–3 sessions per area
Zeitleiste der ErgebnisseVisible results in 2–4 weeks, optimal results in 3 monthsVisible results in 3 weeks, optimal results in 2 months
FettreduktionMild fat reduction alongside muscle buildingSignificant fat reduction
MuskelaufbauYes (builds muscle mass)NEIN
Ideal fürPeople seeking muscle toning and mild fat reductionPeople seeking fat reduction without affecting muscle
NebenwirkungenMild soreness, muscle fatigue, redness, swellingRedness, swelling, bruising, numbness, skin irregularities (e.g., dimpling)
Cost per Session$750–$1,000$600–$1,200
FDA -GenehmigungYes (for body shaping)Yes (for fat reduction)
WartungRecommended every 6 monthsMaintain with a healthy lifestyle; weight gain can affect results
WirksamkeitEffective for toning muscles and burning fatEffective for fat reduction
CombinationCan be combined with CoolSculpting for enhanced resultsCan be combined with Emsculpt NEO for comprehensive body sculpting
Technology AdvancesEmsculpt NEO combines HIFEM and RFCoolSculpting Elite uses larger, more precise applicators for faster results
Suitable BMI RangeUp to BMI of 35Effective for people with localized fat areas, no BMI restriction
ErholungszeitKeine AusfallzeitenNo significant downtime

Side Effect Comparison: Emsculpt vs. CoolSculpting

CoolSculpting Side Effects

  • Häufige Nebenwirkungen:
    • Temporary numbness or tingling in the treated area.
    • Bruising, swelling, redness, and tightness.
    • Mild pain or sensitivity.
    • Irregularities in the skin, such as dimpling or ripples.
  • Moderate to Severe Side Effects:
    • Paradoxical Adipose Hyperplasia (PAH), where new fat grows in the shape of the treated area.
    • Severe pain, significant swelling, and numbness.
  • Other Potential Side Effects:
    • Redness, swelling, bruising, tenderness, tingling, itching, diarrhea, nausea, throat tightness, cramps, pain, etc.

Emsculpt Side Effects

  • Häufige Nebenwirkungen:
    • Redness or swelling in the treatment area.
    • Muscle soreness, similar to the feeling after a workout.
    • Mild fatigue or increased appetite after the treatment.
  • Moderate Side Effects:
    • Temporary muscle weakness or fatigue in the treated area.
  • Rare Side Effects:
    • No reported serious side effects. However, it is recommended to choose an experienced medical professional to minimize any risks.

Comparison Summary:

  • Häufigkeit: CoolSculpting has a higher incidence of side effects, especially mild discomfort such as numbness, tingling, and swelling. Emsculpt generally has fewer side effects, with mild soreness and fatigue being the most common.
  • Schwere: The moderate to severe side effects of CoolSculpting, such as PAH and significant pain, tend to be more severe compared to Emsculpt’s generally mild side effects, which are rare and not serious.

Ready to elevate your services? Partner with Mico Aes today for premium beauty equipment that ensures client satisfaction and business growth. Contact us now to learn more!

Weitere verwandte Blogs:

Emsculpt Vorher und Nachher 4 Sitzungen

Wie lässt sich Emsculpt mit Diät und Bewegung kombinieren, um optimale Ergebnisse zu erzielen?

Kann Emsculpt bei allen Körpertypen angewendet werden?

Wie schneidet Emsculpt im Vergleich zu anderen Körperformungsmethoden ab?

die besten Emsculpt-Geräte für die Körperformung für zu Hause

CoolSculpting Vorher und Nachher: ​​Entdecken Sie die Ergebnisse des Fettgefrierens für einen konturierten Körper

Funktioniert Kryo-Schlankheitskur? Entdecken Sie die Wissenschaft hinter effektiven Behandlungen zur Fettreduzierung

Kosten für Cool Sculpting Machine: Investitionsaufschlüsselung für Kliniken und medizinische Spas

CoolSculpting Vorher und Nachher: ​​Transformationen, Vorteile und was Sie erwartet

FAQ für die Behandlung von Kryolipolyse

Wunderbar! Teilen Sie diesen Artikel

Über den Autor

Ella von Mico Aes

Ella Chan

Willkommen auf meinem Blog-Kanal, in den ich über 10 Jahre Erfahrung in der Schönheitsmaschinenbranche einbringe. Von Salonmaschinen bis hin zu Schönheitsgeräten für den Heimgebrauch – ich führe Sie durch die neuesten Entwicklungen, stelle zuverlässige Informationen bereit und helfe Ihnen, fundierte Entscheidungen zu treffen. Begleiten Sie mich auf dieser transformativen Reise, um Ihr wahres Schönheitspotenzial mithilfe der Kraft der Technologie freizusetzen.

Weitere Produkte anzeigen

Über Mico Aes

mico aes logo-3

Mico Aes ist seit über 15 Jahren ein professioneller Hersteller von Schönheitsmaschinen in China. Wir verfügen über alle Arten von Geräten für medizinische Spas, IPL- und Laser-Haarentfernungsgeräte, Hifu-Geräte, Modelliermaschinen, Kryolipolyse-Geräte, Pico-Lasergeräte, HF-Geräte und Kavitationsgeräte , Hydro-Gesichtsgeräte und LED-Lichttherapiegeräte sowie einige Schönheitsgeräte für den persönlichen Gebrauch. Weitere Details, oder kontaktiere uns.

Warenkorb
Nach oben scrollen