Máy Indiba
- ✓ Nhà máy trực tiếp
- ✓ Kiểm tra trước khi giao hàng & Kiểm tra
- ✓ Đào tạo người vận hành & Giao thức
- ✓ Bảo hành 1 năm + Hỗ trợ từ xa trọn đời
- ✓ Phụ tùng thay thế & Hỗ trợ sửa chữa
- ✓ Hỗ trợ OEM/Nhà phân phối
Máy tần số vô tuyến 448 kHz CET/RET chuyên nghiệp
So sánh các hệ thống tần số vô tuyến điện dung và điện trở chuyên nghiệp cho quy trình làm việc tập trung vào thẩm mỹ, sức khỏe, vật lý trị liệu và phục hồi. Chọn giữa các cấu hình 300–400W và 400–600W dựa trên thiết bị phun, khả năng kiểm soát đầu ra, mục đích sử dụng và trình độ của người vận hành.
RF 448 kHz • CET & Chế độ RET • Đầu ra có thể điều chỉnh • Đào tạo chuyên nghiệp
Máy tần số vô tuyến 448 kHz CET/RET chuyên nghiệp
448 kHz radiofrequency machines deliver controlled monopolar RF energy through capacitive and resistive electrodes. Depending on the selected applicator, operating mode, output level, and professional protocol, these systems can be incorporated into aesthetic, wellness, physiotherapy, and recovery-focused services. CET and RET describe different electrode configurations rather than guaranteed treatment depths. Buyers should compare the actual generator, output controls, electrode set, return plate, temperature-management process, operating modes, intended use, and regulatory documentation of each machine.
Thông báo nhãn hiệu: INDIBA® là thương hiệu thuộc sở hữu của INDIBA S.A.U. Các sản phẩm hiển thị trên trang này không được mô tả là hệ thống INDIBA chính hãng, thiết bị được INDIBA ủy quyền hoặc sử dụng công nghệ INDIBA độc quyền trừ khi có văn bản ủy quyền và bằng chứng cụ thể về mẫu máy.
So sánh các hệ thống RF 448 kHz có sẵn
Hệ thống RF CET/RET 448 kHz — 300–400W
Cấu hình nguồn được liệt kê thấp hơn dành cho các phòng khám, phòng chăm sóc sức khỏe, thực hành vật lý trị liệu và nhà cung cấp dịch vụ thẩm mỹ yêu cầu nền tảng chuyên nghiệp nhỏ gọn.So sánh máy RF 448 kHz
| Tính năng | Hệ thống 400–600W | 300–400W System |
|---|---|---|
| Tần số hoạt động | Listed as 448 kHz | Listed as 448 kHz |
| Listed Power Range | 400–600W | 300–400W |
| Energy Configuration | Confirm included CET and RET electrodes | Listed with CET and RET operating modes |
| Typical Buyer | Higher-volume practices comparing broader output capacity | Smaller clinics and studios requiring a lower-power platform |
| Ứng dụng | Model-specific aesthetic, wellness, or professional therapy workflows | Model-specific aesthetic, wellness, or professional therapy workflows |
| Key Selection Factor | Output stability, controls, electrode set, cooling, and treatment volume | Portability, included accessories, output controls, and service menu |
| Medical or Rehabilitation Use | Requires model-specific authorization and qualified clinical operation | Requires model-specific authorization and qualified clinical operation |
Maximum listed wattage does not independently determine treatment depth, clinical performance, or safety. Confirm the measured RF output, available power steps, electrode dimensions, operating modes, temperature controls, return-plate design, and intended-use documentation before ordering.
How CET and RET Radiofrequency Differ
CET — Capacitive Energy Transfer
CET typically uses an insulated active electrode and a return plate. Energy distribution is influenced by electrode construction, tissue characteristics, contact, movement, output, and treatment technique.RET — Resistive Energy Transfer
RET typically uses an uninsulated active electrode and a return plate. Its current pathway and heating behavior differ from capacitive operation and require separate parameter training.Return Plate
Monopolar CET/RET systems normally require a correctly positioned return electrode to complete the electrical circuit. Poor contact may increase discomfort or burn risk.Thermal Operation
Higher settings may produce noticeable tissue warming. Operators must monitor skin response, client sensation, applicator movement, contact medium, and treatment time.Sub-Thermal Operation
Some systems may support lower-output workflows without pronounced surface warmth. The intended application and available modes must be verified for the exact model.Electrode Selection
Electrode material, insulation, diameter, shape, and intended area affect energy distribution. Applicators should be selected according to manufacturer training rather than depth claims alone.Professional Application Areas
Do not automatically transfer research conducted with an INDIBA® device to an unrelated 448 kHz machine. Matching one frequency does not establish equivalent waveform, output accuracy, electrode design, control system, safety performance, regulatory status, or clinical outcomes.
Máy Indiba
-
-
Doanh thu!
Hệ thống tần số vô tuyến trị liệu hoạt động Indiba 448KHz để giảm đau chăm sóc sâu và loại bỏ chất béo Công suất 300–400W
Giá gốc là: $ 899,00.$869.00Giá hiện tại là: $869,00.
How to Choose a 448 kHz CET/RET RF Machine
Select a system according to its documented intended use, operator qualifications, electrode configuration, output controls, temperature-management process, service volume, and destination-market requirements. Power alone should not determine the purchase decision.Thông số kỹ thuật để xác nhận trước khi đặt hàng
| Đặc điểm kỹ thuật | Những gì cần xác minh |
|---|---|
| Tần số hoạt động | Exact frequency, permitted tolerance, waveform, and model-specific test documentation |
| Rated vs RF Output Power | Whether the listed wattage describes input power, generator rating, or measured RF output |
| CET Electrodes | Quantity, insulation, diameters, intended areas, connectors, and replacement availability |
| RET Electrodes | Quantity, material, diameters, intended areas, connectors, and replacement availability |
| Return Electrode | Dimensions, cable, contact requirements, positioning guidance, and replacement cost |
| Chế độ hoạt động | Continuous, pulsed, thermal, sub-thermal, automatic, or model-specific options |
| Giám sát | Temperature feedback, contact detection, impedance monitoring, timer, and warning systems |
| Conductive Medium | Required cream or gel, ingredients, usage rate, compatibility, and recurring cost |
| Điện áp và phích cắm | 110V or 220V configuration and correct destination-country plug |
| Tình trạng quy định | Certificates and permitted claims for the exact model in the destination market |
| Sự bảo đảm | Main-unit, handpiece, electrode, cable, and accessory coverage |
Professional Screening and Safe Operation
Before the Session
- Complete an appropriate health, medication, implant, and skin assessment.
- Confirm the provider is permitted to offer the intended service.
- Inspect electrodes, insulation, cables, connectors, and the return plate.
- Remove jewelry and other conductive objects from the treatment area.
- Check skin sensation and position the return electrode according to training.
- Begin with conservative output and explain the expected warming sensation.
During and After the Session
- Maintain appropriate applicator contact and movement.
- Monitor skin temperature, client sensation, and return-plate contact.
- Do not increase output solely to create more intense heat.
- Stop if sharp pain, burning, numbness, dizziness, or unexpected skin changes occur.
- Record the mode, electrode, output, duration, area, and client response.
- Clean electrodes and cables according to the supplied instructions.
Thông báo an toàn: Radiofrequency treatment may be unsuitable for clients with pacemakers or other implanted electronic devices, certain metal implants in the treatment area, pregnancy, active cancer, acute infection, open wounds, severe vascular disease, suspected blood clots, impaired sensation, uncontrolled medical conditions, or recent surgery. Final contraindications must follow the exact machine’s instructions, applicable regulations, and appropriate clinical assessment.
Cung cấp và hỗ trợ thiết bị
Đào tạo người vận hành
Receive guidance covering CET and RET setup, electrode selection, return-plate placement, parameter adjustment, conductive media, cleaning, and troubleshooting.Phạm vi bảo hành
Standard support includes a one-year warranty for the main unit. Confirm separate coverage for handpieces, electrodes, cables, and accessories.Hỗ trợ kỹ thuật
Access remote troubleshooting, maintenance assistance, and support for compatible electrodes, cables, return plates, and replacement parts.Hỗ trợ OEM và nhà phân phối
Discuss eligible branding, exterior design, interface language, manuals, packaging, accessories, and distributor configurations.- MOQ of one unit
- Kiểm tra và thử nghiệm trước khi giao hàng
- Đào tạo người vận hành và hướng dẫn giao thức
- Bảo hành thiết bị chính một năm
- Bảo hành tay khoan sáu tháng theo quy định
- Hỗ trợ kỹ thuật 24/7
- Electrode, cable, and spare-parts support
448 kHz CET/RET RF Machine FAQs
Are these genuine INDIBA machines?
No such claim should be made unless the machines are manufactured or officially authorized by INDIBA S.A.U. These products should be described by their verified technology, such as 448 kHz CET/RET radiofrequency systems.
Is INDIBA the generic name for 448 kHz radiofrequency?
No. INDIBA is a protected brand. Other manufacturers may produce RF systems operating at a similar frequency, but that does not make those systems INDIBA products or establish technological equivalence.
What is the difference between CET and RET?
CET generally uses an insulated active electrode, while RET generally uses an uninsulated electrode. Their current distribution and heating behavior differ, so each mode requires suitable accessories and operating parameters.
Does RET always penetrate deeper than CET?
That description is an oversimplification. Energy distribution depends on the electrode, return plate, tissue properties, contact medium, output, movement, and electrical pathway—not only the name of the mode.
Is the 600W machine automatically more effective?
No. First confirm whether the figure represents electrical input, generator capacity, or measured RF output. Treatment performance also depends on output stability, controls, electrodes, technique, and intended use.
Can these machines be advertised for pain relief?
Pain-relief, rehabilitation, injury-recovery, and post-surgical claims may be regulated medical claims. They should only be used when supported by the exact model’s authorization, evidence, qualified operation, and destination-market rules.
Can 448 kHz RF permanently remove fat?
Permanent fat removal should not be promised without model-specific evidence and authorization. The system should not be marketed as a weight-loss treatment.
Is treatment pain-free and suitable for every skin type?
No absolute claim should be made. Clients may experience warmth or discomfort, and suitability depends on health history, sensation, implants, treatment area, settings, and professional assessment.
Những vật tư tiêu hao nào được yêu cầu?
Most CET/RET systems require a compatible conductive cream or medium. Electrodes, cables, connectors, return plates, and applicator components may also require periodic replacement.
Tôi nên xác nhận những gì trước khi đặt hàng?
Confirm the true RF output, operating frequency, CET and RET accessories, return plate, modes, monitoring features, voltage, regulatory documents, intended use, training, warranty, and replacement-part costs.