MS-11 Plus EMS Chair for Pelvic Floor Training and Back Massage

The MS-11 Plus EMS Chair is a professional 2-in-1 system that combines seat-based pelvic floor muscle training with a separate waist and lower-back massage function.

The electromagnetic training module beneath the seat is designed to stimulate the pelvic floor muscles while the user remains comfortably seated and fully clothed. A second functional area is integrated into the backrest, providing a dedicated massage mode for the waist and lower-back area.

With five operating modes, adjustable intensity and a built-in 5-inch touchscreen, the MS-11 Plus is designed for beauty clinics, wellness centers, postpartum recovery centers, physiotherapy practices and professional pelvic floor training facilities.

MS-11 Plus at a Glance

• Product type: Professional EMS pelvic floor training chair
• Model: MS-11 Plus
• Design: 2-in-1 chair
• Seat function: Pelvic floor muscle training
• Backrest function: Waist and lower-back massage mode
• Technology: High-intensity focused electromagnetic energy
• Maximum stated intensity: 7 Tesla
• Frequency: 1–100 Hz
• Programs: Cardio, Power, Shaping, Massage and Manual
• Display: 5-inch LCD touchscreen
• Operation: Non-invasive and fully clothed
• Applicable users: Both women and men
• Rated power: 1500 W
• Voltage: AC 110 V/220 V

Two Functional Areas in One Chair

Seat-Based Pelvic Floor Muscle Training

The seat contains the primary electromagnetic training module. When activated, it generates a focused electromagnetic field that stimulates motor neurons associated with the pelvic floor muscles.

This stimulation produces repeated involuntary muscle contractions without requiring the user to perform conventional pelvic floor exercises actively.

The user remains seated and fully clothed while the operator selects the appropriate program, session time and intensity.

The seat function may be incorporated into professionally supervised programs for:

• Pelvic floor muscle training
• Postpartum pelvic floor rehabilitation support
• Pelvic floor muscle weakness
• Bladder-control support programs
• Pelvic and core muscle conditioning
• Men’s pelvic floor training
• General pelvic wellness programs

The MS-11 Plus is not intended to replace professional diagnosis or individualized medical care. Suitability should be assessed before treatment.

Waist and Lower-Back Massage

A separate functional area is built into the backrest. It provides a dedicated Massage Mode for the waist and lower-back region.

This function is designed to support comfort and relaxation while the user is seated. It may also be used separately, depending on the selected operating mode and device configuration.

The backrest should be described as providing an electromagnetic waist and lower-back massage mode. It should not be presented as mechanical kneading, vibration or roller massage unless those functions are separately confirmed.

How the MS-11 Plus Works

The MS-11 Plus uses high-intensity focused electromagnetic energy to induce muscle contractions in the selected treatment area.

For pelvic floor training, the user sits over the electromagnetic output area in the seat. The operator selects a program and gradually increases the intensity according to the user’s comfort and professional assessment.

A typical session follows these steps:

1. The operator completes a suitability and contraindication check.
2. The user removes metallic objects and sits fully clothed on the chair.
3. The user’s position is adjusted so the pelvic floor area is centered over the seat’s output zone.
4. The required seat or backrest function is selected.
5. The operator chooses an automatic program or Manual Mode.
6. The session begins at a low intensity.
7. Intensity is gradually increased according to user tolerance.
8. The user remains seated throughout the session.
9. The operator records the program, intensity and session duration.

The product brochure states that the system can generate approximately 12,000 pelvic floor muscle contractions during a 30-minute session. This is a manufacturer-stated equipment claim and should not be interpreted as a guaranteed clinical result.

Five Operating Modes

Cardio Mode

A preset program using changing electromagnetic output patterns for structured muscle stimulation.

Power Mode

A stronger training program intended for users who have already adapted to lower stimulation levels.

Shaping Mode

A preset program designed for progressive muscle-conditioning sessions.

Massage Mode

A comfort-focused program associated with the waist and lower-back functional area.

Manual Mode

Allows the operator to adjust available frequency parameters, intensity and session time according to the user’s needs and the facility’s operating protocol.

Program availability and screen layout may vary according to the software version supplied with the machine.

Key Features

2-in-1 Functional Design

The seat provides pelvic floor muscle training, while the backrest provides a separate waist and lower-back massage function.

Fully Clothed Sessions

Users normally remain fully clothed, helping facilities deliver a more convenient and private experience.

Non-Invasive Operation

No surgery, needles or internal probes are required.

7 Tesla Stated Maximum Intensity

The manufacturer’s technical material lists a maximum electromagnetic intensity of 7 Tesla.

Adjustable Frequency

The system supports a stated frequency range of 1–100 Hz.

Five Treatment Programs

Cardio, Power, Shaping, Massage and Manual modes support different operating requirements.

5-Inch LCD Touchscreen

The integrated touchscreen provides access to treatment-area selection, program selection, intensity and session-time controls.

Dual-Voltage Configuration

The machine supports AC 110 V or 220 V configurations. The correct voltage version must be confirmed before shipment.

Mobile Chair Design

Four caster wheels allow the chair to be repositioned within the treatment room. The wheels should be locked before operation.

No Routine Consumables

The standard electromagnetic training function does not require disposable applicators or replacement treatment cartridges.

Typical Professional Applications

Subject to professional assessment and local regulatory requirements, the MS-11 Plus may be used within programs related to:

• Pelvic floor muscle conditioning
• Postpartum pelvic floor recovery support
• Pelvic muscle weakness
• Bladder-control support
• Men’s pelvic floor exercise
• Core and pelvic stability training
• Waist and lower-back relaxation
• Lower-back muscle conditioning
• Professional wellness and rehabilitation services

Avoid presenting the device as a guaranteed treatment or cure for urinary incontinence, pelvic organ prolapse, sexual dysfunction, prostate disease, chronic pain or other medical conditions unless the exact intended use and supporting regulatory documentation have been verified for the destination market.

Technical Specifications

Item	Specification
Product name	MS-11 Plus EMS Pelvic Floor Training Chair
Model	MS-11 Plus
System design	2-in-1 seat and backrest system
Seat function	Pelvic floor muscle training
Backrest function	Waist and lower-back massage mode
Technology	High-intensity focused electromagnetic energy
Maximum stated intensity	7 Tesla
Frequency	1–100 Hz
Rated power	1500 W
Voltage	AC 110 V/220 V
Fuse	15 A
Display	5-inch LCD touchscreen
Operating modes	Cardio, Power, Shaping, Massage and Manual
Product dimensions	Approximately 65 × 58.5 × 71 cm
Package dimensions	Approximately 75 × 68 × 78 cm
Net weight	Approximately 55.5 kg
Gross weight	Approximately 78 kg
Mobility	Four caster wheels

Specifications should be confirmed against the final production configuration and purchase contract before ordering.

User Positioning

Correct positioning is important for effective and comfortable operation.

For seat-based pelvic floor training:

• The user should sit upright and centered on the seat.
• The pelvic floor area should be positioned over the marked seat output zone.
• The user’s feet should remain stable.
• The user should avoid leaning excessively forward or to either side.
• Intensity should begin at a low level and increase gradually.

For the waist and lower-back massage function:

• The user’s lower back should rest comfortably against the backrest.
• The functional area should align with the intended waist or lower-back region.
• The operator should confirm comfort before increasing intensity.

Suggested Session Procedure

A commonly used session duration is approximately 30 minutes, but the appropriate duration, frequency and intensity depend on the user, selected mode and professional operating protocol.

Operators should not promise a fixed number of sessions or guaranteed outcome.

A responsible service process should include:

• Initial consultation
• Contraindication screening
• Treatment-area selection
• Baseline comfort assessment
• Gradual intensity adjustment
• Session record
• Periodic reassessment

What Is Included?

The standard package may include:

• One MS-11 Plus main unit
• Integrated electromagnetic seat module
• Integrated functional backrest
• 5-inch LCD control panel
• Main power cable
• Standard electrical components
• User manual
• Standard export packaging

The exact accessory list, plug type, voltage configuration and documentation package must be confirmed in the final quotation and packing list.

Installation Requirements

Before installation, confirm:

• The ordered voltage matches the facility’s electrical supply.
• The wall outlet and circuit can support the stated 1500 W load.
• The power outlet is correctly grounded.
• The equipment is installed in a dry and well-ventilated room.
• Sufficient clearance is maintained around the ventilation openings.
• The caster wheels are locked during operation.
• Strong magnetic fields will not interfere with nearby sensitive equipment.
• Metal objects and magnetic-storage items are kept away from the operating area.

Installation and operation should follow the supplied user manual.

Operator Training

Supplier training should cover:

• Equipment installation
• Power and safety checks
• User suitability screening
• Correct pelvic floor positioning
• Correct backrest positioning
• Program selection
• Intensity and time adjustment
• Use of Manual Mode
• Cleaning and routine maintenance
• Basic fault identification
• Emergency shutdown procedure

Training format, language and availability should be confirmed before purchase.

Cleaning and Maintenance

To support safe daily operation:

• Turn off and unplug the machine before cleaning.
• Use a soft cloth and a suitable non-abrasive cleaner.
• Do not pour liquid directly onto the seat, backrest, screen or ventilation openings.
• Keep the touchscreen clean and dry.
• Inspect the power cable and plug regularly.
• Keep ventilation openings unobstructed.
• Check the caster wheels and locks periodically.
• Do not open or modify the machine without authorization.
• Contact the supplier if abnormal noise, odor, heat or error messages occur.

Safety and Contraindications

The MS-11 Plus generates a strong electromagnetic field. Professional screening is required before use.

The machine may be unsuitable for users with:

• Pacemakers or implanted electronic devices
• Metal implants within or near the treatment area
• Pregnancy or suspected pregnancy
• Active bleeding
• Uncontrolled cardiovascular conditions
• Epilepsy or seizure disorders
• Active infection in the intended treatment area
• Recent surgery without medical clearance
• Severe neurological or musculoskeletal conditions
• Any condition for which electromagnetic stimulation is contraindicated

This is not a complete contraindication list. The final user manual, local regulations and qualified professional guidance take priority.

Warranty and Technical Support

Warranty duration is not specified in the supplied MS-11 Plus brochure. The product page should not publish a warranty period until the supplier confirms it in writing.

The final purchase agreement should state:

• Main-unit warranty period
• Spare-parts warranty
• Items excluded from warranty
• Remote support availability
• Replacement-part process
• Response time
• Shipping responsibility for replacement parts
• Support available after the warranty expires

OEM and ODM Options

Depending on order quantity and supplier confirmation, customization may include:

• Buyer logo
• Product label
• Interface language
• Startup screen
• User manual
• Packaging
• Color or appearance options
• Distributor documentation

All customizations should be listed in the purchase contract and approved before production.

Frequently Asked Questions

What is the difference between the seat and backrest functions?

The seat is used for electromagnetic pelvic floor muscle training. The backrest provides a separate waist and lower-back massage mode.

Is the backrest a mechanical massage system?

The brochure identifies a Massage Mode but does not confirm rollers, kneading mechanisms or mechanical vibration. It should be described as an electromagnetic waist and lower-back massage function unless additional hardware information confirms otherwise.

Can the seat and backrest operate at the same time?

The control interface shows separate seat and backrest function selection. Simultaneous operation should be confirmed with the supplier for the final software and hardware configuration.

Do users need to remove their clothes?

No. Users normally remain fully clothed during operation.

Does the system require internal probes?

No. The system works externally through the chair.

How long is one session?

The manufacturer’s promotional material refers to a 30-minute pelvic floor training session. The actual session duration should be selected according to the user and the professional operating protocol.

How many modes are available?

The system provides five listed modes: Cardio, Power, Shaping, Massage and Manual.

Can the intensity be adjusted?

Yes. The touchscreen interface provides intensity and time controls.

Can men use the MS-11 Plus?

The chair may be used for professionally supervised male and female pelvic floor training, subject to suitability screening.

Does the device require consumables?

The standard electromagnetic training function does not require routine disposable treatment cartridges or applicators.

What voltage does the machine use?

The brochure lists AC 110 V/220 V. Buyers must confirm the required voltage and plug type before production.

Is 7 Tesla the operating intensity for every program?

The brochure states a maximum intensity of 7 Tesla. Actual output may vary by program, intensity setting and production configuration.

Is training included?

Training availability, format and language must be confirmed in the supplier’s quotation.

What warranty is provided?

The supplied brochure does not specify the warranty period. Buyers should request written warranty terms for the exact MS-11 Plus configuration.