2-Griff vs. 4-Griff vs. 5-Griff EMS-Modelliermaschinen: Welches ist das Richtige für Ihre Klinik?

Artikelinhalt

Choosing an EMS sculpting machine involves more than counting the applicators in the box. A machine with four or five handles does not automatically provide four or five independently controlled outputs, and a higher handle count does not automatically mean more completed treatments per day.

Three specifications deserve separate attention:

  • Handle count — how many physical applicators are included.
  • Independent channel count — how many applicators or applicator groups can be controlled separately.
  • Actual treatment capacity — how effectively the equipment supports your protocols and daily appointment schedule.

These are related but not interchangeable. This guide compares 2-handle, 4-handle and 5-handle configurations, explains how independent channels change daily operation, and gives you the verification list we would want if we were buying — including the confirmed channel architecture of our own equipment.

Quick Answer: Which EMS Configuration Should You Choose?

The right answer depends on workload, protocols and staffing — but the price gaps are smaller than most buyers assume, and the smallest gap buys the most control.

KonfigurationChannelsPreis (USD)Real advantageWhat to verify
2 Griffe11.699 $ – 2.769 $Simplest setup, lowest entry costBoth handles share one parameter set — one area per client
4 handles (standard)22.599 bis 4.099 US-DollarTwo separately controlled zonesMost 4-handle units are 2-channel, not 4-channel
4 handles, 4-channel upgrade4standard + $400Every applicator individually adjustableExact independent functions, in writing
5 handles2 (+ shared pad)machine + $899 padFour paddles plus one pad cushion: more treatment positionsThe pad shares the output; no independent energy or frequency control

Our recommendation: choose by output architecture, not by handle count. On our current equipment the confirmed facts are that 2-handle units run one shared channel, standard 4-handle units run two channels (two handles each), and a genuine four-channel configuration is available for +$ 400. That $400 option needs roughly two $200 sessions to pay for itself — the cheapest capacity-per-dollar decision in this comparison. If you are a single-room owner-operator, the 2-handle machine is still the rational buy; the moment you want a second treatment zone, the 4-handle machine is where that becomes possible.

Our EMS Configurations: Handles, Channels, Output and Price

We publish this because it is the specification sheet we would want from anyone else. These figures apply to the Mico Aes configurations listed here and should not be assumed to describe other brands‘ machines.

KonfigurationPhysical componentsEMS channelsControl arrangementPeak fieldLeistungPreis (USD)
2-Handle EMS2 standard handles1Both handles share energy and frequency settings; start and stop together7 TUp to 1,500 W1.699 $ – 2.769 $
Standard 4-Handle EMS4 standard handles2Two handles per channel; each pair shares settings; the two channels run simultaneously9 TBis zu 3.000 W2.599 bis 4.099 US-Dollar
4-Handle EMS + RF4 standard handles2 EMS channelsSame two-handles-per-channel EMS structure; RF assessed separately13 T2,000 / 5,000 W2.399 $ – 4.899 $(4-handle HIFEM + RF)
4-channel upgrade4 standard handles4Four independent EMS output channels, full rated output on all four13 TBis zu 3.000 W+ $400
5-applicator configuration4 handles + 1 EMS pad cushion2 (+ pad on shared output)Pad runs with all four handles, follows their shared settingsModel-dependentModel-dependentmachine price + $899

The full set of configurations we quote, with model-level specifications, is in the EMS body sculpting machine category; the EMS facial Und EMS-Stuhl sub-categories cover adjacent applicator formats.

Standard 2-handle: one channel, two handles

The two applicators share a single EMS output channel. They operate at the same time but not independently: one energy setting, one frequency setting, one start/stop. For the most common protocol — both handles on one abdominal panel at the same intensity — this is a simple, adequate and cheap arrangement. It is the wrong machine if you want abdomen at one level and buttocks at another in the same session, or two clients at different settings.

Standard 4-handle: four applicators, two zones

Each channel drives two applicators. The pair on a channel shares settings; the two channels operate simultaneously and independently. So four physical applicators give you two separately adjustable zones, not four. This is the single most misread line in an EMS specification sheet, and it is the reason two machines with identical-sounding titles behave differently in a clinic.

Can one machine treat two clients at once?

Ja. Each client occupies one channel with two applicators, and because the two channels are independently adjustable, the two clients can run at different energy and frequency settings. One treatment position per client is required, and once the applicators are placed the cycle is self-timed, so a single technician can start both. We also confirm that both channels hold rated output with all four applicators active — we do not see a significant output reduction in simultaneous operation on these configurations. Ask any other supplier for their multi-channel load figure rather than accepting a single-applicator maximum.

The four-channel upgrade: +$400

The standard 4-handle machine can be upgraded to four independent EMS output channels for an additional 400 USD. All four handles can then be operated independently, with full rated output across all four. What the upgrade genuinely buys is independent control per applicator: asymmetric work (one weaker side, post-partum midline treatment at different levels left versus right), mixed applicator sizes at different intensities in a single session, or four separately billed zones when you have the treatment positions. What it does not buy is more power, a shorter session, or throughput your rooms cannot staff. Get the specific independent functions — separate energy, separate frequency, independent start/stop, independent programs — confirmed in the quotation.

5-applicator configuration: four handles plus a pad cushion

The five-applicator option adds one EMS pad cushion to the four standard handles. The pad can run simultaneously with the handles, but it shares the existing EMS output architecture: it has no independent energy adjustment and no independent frequency adjustment. Treat it as additional coverage within a settings group, not as a fifth independently controlled zone

EMS + RF: assess the two systems separately

Our 4-handle EMS + RF units carry two EMS channels in the same two-handles-per-channel structure. The RF side needs its own confirmation of output architecture, frequency, power and operating modes, and of whether EMS and RF can run simultaneously. Two EMS channels do not imply two RF channels. Background reading: RF and HIFEM for body sculpting and, for placement and operating modes, how to use an EMS/HIFEM system.

Handles, Applicators, Pads and Channels Defined

Four terms get used interchangeably in EMS marketing. They describe different parts of the machine.

  • Handle / applicator / paddle — the physical treatment component placed on a body area. The number in the product title.
  • Pad cushion — a flat applicator format that may share an existing output instead of occupying its own channel.
  • Channel — an output stage delivering and controlling energy to one applicator or to a group of them.
  • Zone — the clinic’s unit of work: one area, one parameter set, or one client.

A „4-handle“ machine may therefore be a one-, two- or four-channel system; all three ship four handles, and their operating capability differs materially. Independence also needs defining: ask whether it covers separate energy adjustment, separate frequency adjustment, independent start/stop, independent programs, and simultaneous operation with the other channels. „Four channels“ without that breakdown is not a complete specification. And a pad cushion is not the same item as a consumable gel electrode pad, which is a replaceable conductive accessory with its own recurring cost.

How Channel Control Works in Practice

Two handles on one channel. One energy level, one frequency; both applicators follow it and start and stop together. Fine when both applicators are meant to share settings; limiting when two areas need different levels or schedules.

Four handles on two channels. Two applicators per channel; each pair shares settings, the two channels run simultaneously. This is our standard arrangement and it supports the most common revenue workflow: one client with two areas, or two clients with one area each — with the constraint that each applicator pair runs at one shared setting.

Four handles on four channels. Each applicator managed separately. This is what matters when the two simultaneous clients need different intensities and neither fits a shared pair profile, or when one client is treating areas with genuinely different parameter requirements.

Four handles plus a pad cushion. Five components on the patient, with the pad inside an existing channel group: more coverage, no additional independently adjustable zone.

The key distinction: simultaneous operation is not the same as independent control. Placement and area combinations should always follow the machine’s treatment protocol — see the Leitfaden für EMS-Körperbehandlungsbereiche.

Figure 1. Channel assignment across four EMS configurations. Panel A: two handles on one shared channel. Panel B: the standard four-handle, two-channel arrangement — two separately adjustable zones. Panel C: the four-channel upgrade at +USD 400. Panel D: the five-applicator option, where the pad cushion joins an existing channel and inherits its settings. Use this diagram as the reference when asking any supplier for a channel assignment drawing of the exact configuration being quoted.
Figure 1. Channel assignment across four EMS configurations. Panel A: two handles on one shared channel. Panel B: the standard four-handle, two-channel arrangement — two separately adjustable zones. Panel C: the four-channel upgrade at +USD 400. Panel D: the five-applicator option, where the pad cushion joins an existing channel and inherits its settings. Use this diagram as the reference when asking any supplier for a channel assignment drawing of the exact configuration being quoted.

Does More Handles Mean More Capacity — or Better Results?

Not necessarily, on both counts.

What the clinical evidence actually says

Published research does not support the idea that more applicators produce better outcomes. A 2022 systematic review of electromagnetic body-contouring trials (Swanson, PMC9869942) reports a standard protocol of four 30-minute sessions, with average outcomes around a 5.5 mm reduction in abdominal fat thickness und a 2.2 mm increase in muscle thickness, and explicitly notes that most included studies were authored by device manufacturers‘ medical advisors and that effect sizes were modest. Handle count sits outside what the evidence measures at all. What the evidence does support is protocol fidelity — the right applicators, on the right area, for the scheduled number of sessions. Session planning is covered in wie viele EMS-Sitzungen nötig sind.

The reference platform in this category is positioned the same way: BTL describes Emsculpt NEO as operator-independent, with large, edge and small applicators covering up to ten treatable areas in a 30-minute cycle. Applicator geometry decides which areas you can treat; channel architecture decides how many you can treat at once.

What actually limits daily capacity

  • Treatment protocol. If a protocol uses two applicators per area, having four available does not shorten the session — it enables a second client or a second area.
  • Channel architecture. Whether all applicators can run simultaneously, and with what degree of control.
  • Output under load. A single-applicator maximum does not prove four-applicator performance. Ask for the simultaneous figure with test conditions stated.
  • Staffing and rooms. One operator and one bed cannot monetise extra applicators the way a two-position setup can.
  • Scheduling. Preparation, positioning, clean-down and documentation consume slots. Handles are one variable, not the equation.

Capacity, Turnover and Break-Even Math

Start from your calendar, not from the handle count. Six treatment hours a day in 45-minute slots (30 minutes on, 15 minutes turnover) gives 360 ÷ 45 = 8 slots per day. Handles rarely create new slots; what they change is what can be sold inside a slot.

AufstellenClients per slotIndependently billed zonesSessions or zones per day (8 slots)Daily revenue ceiling at $200/zone
2-handle, 1 channel118$1,600
4-handle, 2 channels — one client, two areas1216$2,072 – $2,688 (second area billed at a premium, not double)
4-handle, 2 channels — two clients, one area each2216$3,200
4-handle, 4 channels — two clients, two areas each2432$4,144 – $5,376

These are ceilings at one machine with a fully booked calendar, not forecasts; rooms, staff and booking density cap you first. Market pricing for a single 30-minute HIFEM session commonly runs $150–$400 depending on region, and many clinics sell four-session packages rather than single sessions. The second-area premium observed on published clinic menus runs roughly 25–30% (one UK clinic lists £85 for a single area against £110 for two areas together) and can reach about 68% ($147 versus $247 at an Australian clinic) — which is why multi-zone capacity is worth more than the hardware delta suggests. Worked scenarios using those figures are in ROI von EMS-Geräten für Kliniken, and the scheduling side in Profitstrategien der Body-Contouring-Klinik. Substitute your own prices in the ROI-Rechner.

Break-even on the two decisions that matter:

  • +$400 four-channel upgrade ÷ $200 per session ≈ 2 sessions of gross revenue. If independent settings let you book even one pair of simultaneous clients a week who would otherwise have waited, the upgrade repays inside a fortnight. $400 ÷ $200 = 2
  • 2-handle → 4-handle step ≈ $900 at the low end ($2,599 − $1,699) and $1,330 at the high end ($4,099 − $2,769). Funded by second-zone billing rather than gross revenue: $900 ÷ $58.80 ≈ 15 sessions at a 29% premium, $1,330 ÷ $58.80 ≈ 23; $900 ÷ $136 ≈ 7 Und $1,330 ÷ $136 ≈ 10 at a 68% premium. So roughly 7 to 23 paired-zone sessions — one and a half to six months at two such sessions a week. A single-room owner-operator should think hard before paying this gap; a two-position med spa with a full calendar clears it in the first week or two.

All figures use gross session price and exclude consumables, operator wages and room cost. They are an order-of-magnitude test, not an accounting result.

What a 5-Handle EMS Machine Actually Is

In the configurations discussed here, a „5-handle“ machine is four standard EMS paddle handles plus one EMS pad cushion — a flat pad applicator rather than a fifth paddle. That one fact clears up most of the marketing mystery around five-handle listings.

We confirm the behaviour precisely:

  • Composition. Four standard paddle handles plus one pad cushion.
  • Output architecture. The pad shares the machine’s existing EMS output. It does not add a fifth channel.
  • Simultaneous operation. The pad can run at the same time as all four handles.
  • Control. The pad’s energy and frequency follow the shared settings of the channel it sits on; it cannot be adjusted independently.

So the pad extends where you can treat — seated positions, broad flat surfaces, and seat-based applications that a contoured paddle cannot cover — not how independently you can treat. It is the same trade-off as the standard two-channel configuration, one applicator format wider.

And it is not exotic hardware: the pad is the same component sold separately as the Pelvic Floor Massage Cushion ($899), a plug-in accessory for EMSlim and EMS Shape Neo systems. That gives a clinic weighing a five-handle listing a second route to the same capability — buy the 4-handle system now and add the cushion later, instead of hunting for a special configuration. If you are building out a women’s wellness or postpartum menu, also compare the dedicated formats in the EMS chair sub-category before assuming a pad cushion substitutes for a chair or seat.

The honest comparison is therefore „four paddles + one pad“ versus „four paddles“ — not 5 versus 4. Never buy the number; buy the documented function.

Output Specifications, Tesla Figures and Test-Report Traceability

Because we publish our own numbers, we also publish how they were obtained — which is the part of the spec sheet most suppliers skip.

Magnetic field strength: the method changes the answer

On one OFA-series sample (test report 200700301E01, Guangzhou PuLi Testing Co., tested 8 July 2020, model OFA001-01), the maximum field at the centre of the applicator measured 13.46 T under the duty-cycle method Und 4.46 T under the direct method, using a CH-Hall CH1600 gauss meter with an R&S HZ-10 magnetic field probe. That report states the applicable standard was a non-standard method specified by the applicant, and its conclusion applies to the sample submitted.

Two consequences. A roughly three-fold spread produced by measurement method alone means Tesla figures from different suppliers are not directly comparable; and a headline figure without a stated method and measurement point is not a specification. When we list 7 T, 9 T or 10 T above, we are quoting peak field under our own factory test plan — not a clinical dose, and not a standardised rating. If the terminology is unfamiliar, our guide to EMS versus HIFEM technology explains what the field is actually doing.

Electrical, EMC and traceability

Our OFA-series documentation includes a CE LVD test report (No. EVC2005115GZ89L1) against EN 60335-2-23, EN 60335-1 and EN 62233:2008 for human EMF exposure — rated 110/220V~, 50/60Hz, 2200W, Class I, IPX0, maximum ambient 40°C — and an EMC test report (No. EVC2005115GZ89E1) against EN 55014-1, EN 55014-2, EN 61000-3-2 and EN 61000-3-3, in which the equipment is classified Class A, i.e. intended for use in locations other than domestic premises. The certified sample is rated 2200 W, which is not identical to the per-configuration consumption figures above; match every report to the exact model and configuration being quoted. CE marking and medical-device compliance are not the same thing, which we set out separately on our Zertifizierungen und behördliche Dokumentation Seite.

Cooling and continuous operation

Every unit in the current EMS lineup is air-cooled. Air cooling removes the water-loop maintenance that adds cost and downtime on cooled platforms, in exchange for a defined thermal duty: per our OFA-series documentation the equipment is rated for continuous operation up to two hours, followed by a 15-minute rest period. That is a recommended operating schedule, not measured proof of two-hour full-load performance across all channels with the pad cushion active — if you plan all-day back-to-back booking, request the thermal figure for the specific configuration. Vertical and higher-output systems place the greatest demand here; our professional EMS shaping console and the higher-capacity systems in the EMS category are built for continuous-use schedules.

Power figures are four different things

Distinguish rated electrical input, average consumption, peak power, and pulsed or instantaneous output. The 1,500–5,000 W values in this article are input-side ratings for the configuration; they are not output specifications and must not be compared against another supplier’s output claim.

Total Cost of EMS Body Sculpting Machine Ownership

Cost itemCurrent figureNotiz
2-handle machine1.699 $ – 2.769 $Single channel, one zone per client
4-handle machine2.599 bis 4.099 US-DollarTwo channels as standard
Four-channel upgrade+$ 400≈ two sessions at $200 gross
Pad cushion (5-applicator route)899 $Addable later; shares existing output
EMS + RF configuration2.399 $ – 4.899 $RF architecture confirmed separately
Consumable electrode padsno needno need cost
Operator training and completion certificateIncluded, no additional chargeModel-specific protocols plus remote guidance
Garantie1 year, plus lifetime remote technical supportConfirm component-level terms per model
Freight, duties, spare applicatorsQuoted per orderOften larger than the upgrade options above
Total Cost of EMS Body Sculpting Machine Ownership

The pattern worth noticing: the decisions that change how your clinic can operate cost $400 and $899, while the decision that changes the price sheet costs $900–$1,330. Buyers routinely over-weight the second and under-weight the first. Consumable and replacement-applicator pricing is the other silent variable — ask for it before comparing machine prices, and see our Garantiebedingungen for what is covered.

Which Configuration Fits Your Clinic

Single-room studio, mobile operator, or under roughly eight EMS sessions a week — choose 2 handles. Der 2-handle portable EMS at $1,699–$2,769 is the right call for most single-room owner-operated studios: one channel means one area per client, so accept sequential appointments and put the $900–$1,330 you did not spend into booking volume. For a home or studio setting rather than a clinic, read professional versus home-use EMS equipment first — and note these are Class A machines intended for non-domestic locations; our home-use EMSlim Neo configuration is the compact end of the range. Verdict: the rational entry buy.

Small med spa, two treatment positions, one technician — choose the standard 4-handle (2-channel). Der 4-handle portable at $2,599–$4,099 is the sweet spot for two-position practices with steady bookings: two independently controlled zones already deliver both paired-area sessions and two-client sessions, which is where throughput comes from at this size. The ToneWave® EMShape Neo line in the EMS category is offered in 2- and 4-handle formats, with RF variants. Verdict: the default professional configuration.

15+ sessions a week, asymmetric or multi-area menus — add the +$400 four-channel option. Four independently adjustable zones is the difference between a $3,200 and a $4,144–$5,376 daily ceiling in the table above. Verdict: the best value-per-dollar upgrade in this comparison. If your menu also sells tightening, quote the 4-handle HIFEM + RF system; for a dedicated room with sustained volume, compare the professional shaping console and the higher-capacity systems in the physiotherapy and vertical range, where duty rating matters more than handle count.

Need seated or pad-friendly positions — consider the 5-applicator route. Buy the four-handle machine and add the $899 pad cushion when the protocol demands it. Verdict: never buy the number; buy the documented function.

Distributors and private-label buyers. Channel configuration is a per-order specification — state it in the order rather than assuming the catalogue default. See how we supply factory-direct and OEM EMS equipment.

Verification Checklist Before You Order

Send this to every supplier you are quoting and require the answers inside the formal quotation, not in a chat message. We will answer all of it for our own configurations, and you should expect the same from anyone else.

  • Applicators. How many standard handles are included? Are they identical in size and output? Is a pad cushion included, and which channel does it share? What do replacement applicators cost?
  • Channels. How many independent EMS outputs? Which applicators connect to each? Is energy adjustment, frequency adjustment and start/stop independent per channel? Request a written channel assignment diagram for the exact configuration quoted.
  • Simultaneous load. Can all channels run at once? Does rated output hold with every channel and the pad active? Is there a multi-channel load test report, or only a single-applicator maximum?
  • Output and parameters. Magnetic field measurement point and method; frequency range and increments; pulse width and waveform; and the distinction between input power and output power.
  • Thermal. Cooling type, recommended duty cycle, temperature protection, and whether thermal performance was tested under simultaneous operation.
  • Electrical. Voltage, frequency, plug type and consumption for the quoted configuration at your destination.
  • Commercial. What is in the standard package; upgrade and accessory pricing; warranty terms for main unit, applicators and cables; what training is included; spare-parts availability and support response. Model-specific documentation can be requested via manuals and downloads.

A supplier who cannot state the channel architecture for the configuration being quoted has already answered the most important question on this list.

Häufig gestellte Fragen

What’s the difference between 2-handle and 4-handle EMS machines?

Two handles on our portable units share one output channel, so both applicators run identical settings and the machine treats one area per client. Four handles run on two independently controlled channels, which makes a paired-area session or a two-client session possible. The step from two to four handles is a step from one adjustable zone to two — not simply two more pads. Prices reflect it: $1,699–$2,769 versus $2,599–$4,099.

Does a 4-handle EMS machine have four independent channels?

Ours does not. The standard 4-handle configuration runs two channels shared across four applicators. Four independent channels are a $400 upgrade, and that is a control feature, not additional power. Elsewhere on the market, a 4-handle machine may have one, two or four channels — ask.

Is a 5-handle machine the same as a 5-channel machine?

No. Our five-applicator option is four standard paddles plus one pad cushion, which is the same component sold separately as the $899 Pelvic Floor Massage Cushion. The pad runs simultaneously with the handles but shares their channel settings: five physical applicators, two independently adjustable zones.

Can two clients use one 4-handle machine at the same time?

Yes. Each client takes one channel with two applicators, and because the channels are independently adjustable each can run at their own settings. We confirm rated output holds with all four applicators active. You need two treatment positions.

Can a 2-handle machine treat abdomen and buttocks in one session?

Not usefully. Both handles share one channel and one parameter set, and a standard abdominal application already occupies them. Paired-area billing starts at the 4-handle configuration.

What is the difference between two-channel and four-channel EMS?

Two-channel controls two groups of applicators; four-channel controls each applicator separately. Four channels matter for asymmetric treatment, mixed applicator sizes at different intensities, and selling more independently billed zones per block. They do not raise per-applicator output.

Is the $400 four-channel upgrade worth it?

Only if you have the treatment positions and a menu that sells four independently set zones. At a $200 session price it is about two sessions of gross revenue — the hardware is the cheap part; your calendar and staffing are the binding constraint.

Is a four-channel machine more powerful than a two-channel machine?

Not automatically. Channel count describes control architecture, not total power or field strength. Compare measured output, measurement method and simultaneous-load performance.

Should I choose the machine with the highest Tesla specification?

Not on that figure alone. On one of our own samples the same applicator measured 13.46 T at the centre under a duty-cycle method and 4.46 T under a direct method — a roughly three-fold spread produced by method alone. Ask for the measurement point, the method, the instrument, and whether the report covers the exact model being sold.

Do these machines use air cooling or water cooling?

Every model in the current EMS lineup is air-cooled, rated for up to two hours of continuous operation followed by a 15-minute rest period. Air cooling avoids water-loop maintenance; the trade-off is a defined thermal duty you should match to your booking plan.

Ist eine Bedienerschulung inbegriffen?

Yes. Model-specific operator training and the completion certificate are included at no additional charge, alongside a 1-year warranty and lifetime remote technical support. See training resources Und Garantiebedingungen.

Get the Configuration Quoted Against Your Calendar

Tell us your weekly session count, number of treatment positions and target areas, and we will confirm the applicator and channel configuration in writing on your quotation — including the four-channel upgrade at $400 and whether the pad cushion is worth adding. Message us on WhatsApp oder request an equipment recommendation, and browse the EMS body sculpting range or the full Mico Aes catalogue.

Wunderbar! Teilen Sie diesen Artikel

Über den Autor

Ella von Mico Aes

Ella Chan

Willkommen auf meinem Blog-Kanal, in den ich über 10 Jahre Erfahrung in der Schönheitsmaschinenbranche einbringe. Von Salonmaschinen bis hin zu Schönheitsgeräten für den Heimgebrauch – ich führe Sie durch die neuesten Entwicklungen, stelle zuverlässige Informationen bereit und helfe Ihnen, fundierte Entscheidungen zu treffen. Begleiten Sie mich auf dieser transformativen Reise, um Ihr wahres Schönheitspotenzial mithilfe der Kraft der Technologie freizusetzen.

Weitere Produkte anzeigen

Über Mico Aes

mico aes logo-3

Mico Aes ist seit über 15 Jahren ein professioneller Hersteller von Schönheitsmaschinen in China. Wir verfügen über alle Arten von Geräten für medizinische Spas, IPL- und Laser-Haarentfernungsgeräte, Hifu-Geräte, Modelliermaschinen, Kryolipolyse-Geräte, Pico-Lasergeräte, HF-Geräte und Kavitationsgeräte , Hydro-Gesichtsgeräte und LED-Lichttherapiegeräte sowie einige Schönheitsgeräte für den persönlichen Gebrauch. Weitere Details, oder kontaktiere uns.

Warenkorb
Nach oben scrollen