XERF Dual-Frequency Monopolar RF System

6.78 MHz and 2 MHz monopolar RF for professional use

XERF is a non-invasive monopolar RF system with three thermal diffusion modes for different treatment areas and tissue thicknesses. It combines Wave Fit multi-pulse delivery, impedance synchronization, surface-temperature monitoring, and adjustable ICD cooling.

The standard package includes four Effector sizes, with 40 Effectors in total, plus patient return pads, video training, and operating documentation.

Hvordan det fungerer

Monopolar RF delivers electrical energy from a treatment electrode through the tissue to a patient return electrode. Tissue resistance converts this energy into heat, which can produce collagen contraction and support subsequent tissue remodelling.

Skin thickness, tissue composition, and contours vary across the face and neck. XERF uses two frequencies and three selectable modes to adjust thermal diffusion to the treatment area.

For a broader look at RF technology, read our monopolar RF vs bipolar RF comparison.

Mode	RF frekvens	Relative thermal diffusion	Behandlingsovervejelser
Lavvandet	6,78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Midten	6,78 MHz	Moderat	Generel ansigts- og nakkebehandling
Dyb	6,78 MHz efterfulgt af 2 MHz	Deepest of the three modes	Lower face, jawline, submental area, and thicker tissue

Practitioners select the mode according to the patient’s anatomy, skin condition, medical history, and treatment goals.

Four disposable Effectors

Effektor	Contact dimensions	Maksimal RF-energi	Skudtal	Typical application
Effektor 05	5 × 10 mm	18,7 J	600	Small, narrow treatment areas
Effektor 10	10 × 10 mm	38,1 J	600	Små eller buede ansigtsområder
Effektor 40	20 × 20 mm	140 J	600	Generel ansigts- og halsdækning
Effektor 60	20 × 30 mm	220 J	600	Larger areas or thicker tissue

The Effectors use a spider-pattern electrode designed to distribute energy across the contact surface and reduce concentration at the edges. Proper skin contact must be maintained during RF delivery.

Effector selection depends on the area’s size, contours, and tissue thickness. Shot count alone does not indicate treatment energy; contact size, pulse energy, accumulated energy, and treatment mode also matter.

Treatment areas and objectives

Potential treatment areas include the forehead, periorbital and perioral regions, cheeks, lower face, jawline, jowls, submental area, and neck. Treatment must follow the device’s authorized indications and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, reduced elasticity, and loss of facial definition.

Some patients may notice early firmness, with further changes developing over the following weeks and months. Results vary with skin condition, treatment settings, operator technique, and the treatment plan. XERF is not a substitute for surgery and does not produce surgical facelift results.

Research background

Histological research cited by Lutronic reports collagen changes in the dermis and deeper subcutaneous tissue, including changes toward the deep fascial or SMAS region, following combined 6.78 MHz and 2 MHz RF application. These observations do not guarantee a specific treatment depth or clinical result for every patient.

---

Hvorfor Dual-Frequency RF?

Traditionelle monopolære RF-platforme fungerer normalt ved en enkelt frekvens, hvilket skaber en relativt fast termisk profil.

Anatomien i ansigtet og kroppen er dog ikke ensartet. Pande, kinder, kæbelinje, nakke, mave og lår adskiller sig i:

• Hudens tykkelse
• Bindevævsdensitet
• Subkutan fedtfordeling
• Overfladekonturer
• Elektrisk impedans
• Påkrævet behandlingsdybde

Different treatment areas vary in tissue thickness and contours. Combining 6.78 MHz and 2 MHz gives practitioners more options for adjusting energy delivery to these differences.

Shallow and Middle modes use 6.78 MHz with different settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence. The resulting heating pattern depends on pulse timing, energy output, Effector design, cooling, and tissue characteristics—not frequency alone.

For a closer look at the technology, read how 6.78 MHz and 2 MHz dual-frequency monopolar RF works.

---

Treatment process

1. Konsultation: Assess skin condition, tissue thickness, medical history, previous procedures, contraindications, and treatment goals.
2. Forberedelse: Clean the area, position the patient return pad, and apply the required coupling medium according to the operator’s manual.
3. Parameter selection: Choose the Effector, treatment mode, output level, cooling level, shot interval, and activation method.
4. Impedance synchronization: Establish proper contact and complete synchronization before delivering RF energy.
5. Behandling: Maintain full Effector contact while monitoring skin response, patient comfort, temperature, and delivered energy.
6. Post-treatment assessment: Remove the coupling medium, assess the skin, and provide aftercare instructions.

A typical facial treatment may take approximately 15–30 minutes. Duration varies with the treatment area, Effector, settings, and number of shots.

Many treatments can be performed without anesthesia, although comfort management should be determined by the practitioner. Temporary redness, warmth, swelling, or sensitivity may occur. Patients can generally resume daily activities shortly afterward, subject to their skin response and aftercare instructions.

The number of sessions should be determined during consultation.

For further reading on treatment planning, see our dual-frequency monopolar RF protocol and safety guide. Always follow the operator’s manual for your specific device.

Tekniske specifikationer

Specifikation	Detaljer
RF type	Monopolær RF
Frekvenser	2 MHz og 6,78 MHz
Maksimal RF-output ved nominel belastning	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Maksimal RF-output ved referencebelastning	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
RF udgangsniveauer	1–10
Behandlingsmåder	Shallow, Middle, and Deep
Energi levering	Wave Fit multi-puls levering
Skudintervaller	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1–3
Internal cooling	Luftkøling
Vise	10,1 tommer LCD touchskærm
Dimensioner	389 mm B × 856,4 mm L × 1604,1 mm H
Vægt	47 kg
Elektrisk klassificering	Klasse I, type BF anvendt del
Strømforsyning	Enfaset AC 100–120 V, 50/60 Hz
Strømforbrug	1 kVA
RF aktivering	Håndstykke fingerkontakt eller fodkontakt
Behandlingselektrode	Disposable Effector
Patienten går rundt	Disposable patient return pad

With the shot interval set to Off, each activation delivers one RF shot.

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

What’s included

Punkt	Mængde
Dual-frequency monopolar RF main unit	1
Effektor 05	10
Effektor 10	10
Effektor 40	10
Effektor 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Inkluderet
Operating manuals and treatment guidance	Inkluderet

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and compatible consumables are available for ongoing supply.

When budgeting for an RF system, consider ongoing consumable costs alongside the purchase price. Our monopolar RF machine cost and clinic ROI guide provides a starting point for assessing the investment.

Compare RF platforms

Comparing equipment for your clinic? Our XERF vs Thermage guide covers energy delivery, cooling, treatment tips, and purchasing considerations.

For a comparison of dual-frequency and single-frequency systems, read XERF vs Volnewmer, which examines RF technology, treatment workflow, and operating costs.

Training and warranty

Video training and documentation cover setup, Effector replacement, return pad connection, treatment settings, cooling, impedance synchronization, cleaning, maintenance, and basic troubleshooting.

The machine includes a one-year warranty and lifetime remote technical support. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch. Shipping costs, delivery options, and trade terms depend on the destination and order configuration.

Cooling-medium shipment is subject to carrier and destination restrictions. Availability and any separate shipping arrangements will be confirmed before the order is finalized.

Professional-use requirements

The system must be operated by trained professionals following the operator’s manual and an assessment of patient suitability.

It must not be used on patients with a cardiac pacemaker, an implantable cardioverter-defibrillator, or other implanted electrical devices. Review the manual for the complete contraindications, warnings, and precautions before treatment.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and order quantity. We will confirm the configuration, consumable pricing, cooling-medium availability, shipping terms, and warranty coverage.

OEM branding, bulk orders, and distributor options are available on request. Include your branding requirements and target market for a project-specific quotation.

---

Ofte stillede spørgsmål

Hvad er XERF?

XERF er et ikke-invasivt monopolært RF-system, der kombinerer 6,78 MHz og 2 MHz frekvenser for at skabe Shallow, Middle og Deep termiske diffusionstilstande.

Hvordan adskiller XERF sig fra konventionel monopolær RF?

Konventionelle platforme bruger almindeligvis én RF-frekvens. XERF bruger 6,78 MHz og 2 MHz, hvilket gør det muligt for behandleren at vælge forskellige termiske diffusionsdybder i henhold til behandlingsområdet og vævskarakteristika.

Hvordan fungerer Deep mode?

Deep mode leverer 6,78 MHz og 2 MHz sekventielt, hvilket skaber den dybeste termiske spredning af de tre tilgængelige tilstande.

Når XERF SMAS?

Officiel histologisk forskning citeret af Lutronic rapporterede kollagenændringer, der strækker sig mod den dybe fasciale eller SMAS-region efter kombineret 6,78 MHz og 2 MHz RF-applikation. Den faktiske energifordeling afhænger af de valgte parametre og individuelle vævskarakteristika.

Er XERF smertefuldt?

Patienter oplever generelt varme under behandlingen. Wave Fit Pulse og ICD-køling er designet til at reducere ubehag og kontrollere overfladeopvarmning. Individuel følsomhed varierer.

Er anæstesi påkrævet?

Mange behandlinger kan udføres uden bedøvelse. Lægen bør bestemme den passende tilgang til komfortstyring for hver patient.

Hvor lang tid tager behandlingen?

En typisk behandling tager cirka 15-30 minutter. Behandlingstiden varierer afhængigt af området og antallet af skud.

Er der nogen nedetid?

XERF er ikke-invasiv og kræver generelt minimal eller ingen væsentlig nedetid. Midlertidig rødme, varme, hævelse eller følsomhed kan forekomme.

Hvornår kan resultaterne ses?

Nogle patienter kan mærke tidlig fasthed efter behandlingen. Progressiv forbedring kan udvikle sig i løbet af de følgende uger og måneder, efterhånden som kollagenombygningen fortsætter.

Hvor mange behandlinger er nødvendige?

Det passende antal behandlinger afhænger af hudens tilstand, grad af slaphed, behandlingsområde og kliniske mål. En kvalificeret praktiserende læge bør anbefale en individuel behandlingsplan.

Hvilken effektor skal bruges?

Effector selection depends on the size, contour, and thickness of the treatment area. XERF provides 5 × 10 mm, 10 × 10 mm, 20 × 20 mm and 20 × 30 mm options.

Er 600 skud altid ækvivalente mellem forskellige RF-systemer?

Nej. Antal skud alene bestemmer ikke den samlede behandlingsenergi. Effektorstørrelse, pulsenergi, dybde, outputniveau og akkumuleret leveret energi bør også tages i betragtning.

Kan patienter vende tilbage til daglige aktiviteter efter behandlingen?

De fleste patienter kan vende tilbage til normale aktiviteter kort efter behandlingen, afhængigt af deres individuelle hudrespons og praktiserende læges instruktioner.

Er XERF sikkert?

XERF incorporates impedance synchronization, surface-temperature monitoring, adjustable RF levels, three-level ICD cooling, and system alerts to support controlled treatment. The system must be operated by appropriately trained professionals according to the operator’s manual.

---

Vigtige sikkerhedsoplysninger

XERF skal betjenes af uddannede fagfolk efter gennemgang af patientens sygehistorie og egnethed til behandling.

Systemet må ikke anvendes på patienter med:

• En pacemaker
• En automatisk implanterbar cardioverter-defibrillator
• Andre implanterede elektriske enheder

Yderligere kontraindikationer, advarsler og forholdsregler i den officielle brugermanual skal gennemgås før behandling.

Treatment controls

Choose from Shallow, Middle, and Deep modes, with 10 RF output levels and three ICD cooling settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence.

The 10.1-inch touchscreen displays tip-surface temperature, pulse energy, accumulated energy, and shot count. Treatment can be activated using the handpiece finger switch or foot switch.

Feature	Konfiguration
RF teknologi	Monopolær radiofrekvens
Frekvenser	6,78 MHz og 2 MHz
Behandlingsmåder	Shallow, Middle, and Deep
Deep-mode delivery	Sekventiel 6,78 MHz og 2 MHz
RF udgang	Levels 1–10
Energi levering	Wave Fit multi-puls levering
Køling	ICD-køling i tre niveauer
Impedance function	Impedanssynkronisering i realtid
Overvågning	Tip-surface temperature, pulse energy, accumulated energy, and shot count
Vise	10,1 tommer LCD touchskærm
Activation	Håndstykke fingerkontakt eller fodkontakt

What’s included

Punkt	Mængde
Dual-frequency monopolar RF main unit	1
Effektor 05	10
Effektor 10	10
Effektor 40	10
Effektor 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Inkluderet
Operating manuals and treatment guidance	Inkluderet

The package contains 40 Effectors in total. Cooling-medium shipment depends on the destination and carrier restrictions. We will confirm availability and shipping arrangements before you finalize your order.

Fire effektorstørrelser

Select the Effector according to the treatment area, tissue thickness, anatomical contours, and planned settings.

Effektor	Contact dimensions	Maksimal RF-energi	Skudtal	Typical application
Effektor 05	5 × 10 mm	18,7 J	600	Small, narrow treatment areas
Effektor 10	10 × 10 mm	38,1 J	600	Små eller buede ansigtsområder
Effektor 40	20 × 20 mm	140 J	600	Generel ansigts- og halsdækning
Effektor 60	20 × 30 mm	220 J	600	Larger areas or thicker tissue

When comparing RF systems, consider contact size, pulse energy, accumulated energy, and treatment mode alongside shot count.

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and other compatible consumables are available for ongoing supply.

All prices are in USD and subject to confirmation when quoted. Shipping, import charges, and local taxes are excluded unless stated in your quotation.

Ask About Consumable Supply

Behandlingsmåder

The three modes provide different thermal diffusion profiles. Practitioners can adjust the mode, Effector, output level, and cooling setting following an individual assessment.

Mode	Frekvens	Relative thermal diffusion	Behandlingsovervejelser
Lavvandet	6,78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Midten	6,78 MHz	Moderat	Generel ansigts- og nakkebehandling
Dyb	6,78 MHz efterfulgt af 2 MHz	Highest of the three modes	Lower face, jawline, submental area, and thicker tissue

Behandlingsområder

Potential treatment areas include the forehead, cheeks, perioral area, lower face, jawline, jowls, submental area, and neck. Use depends on practitioner assessment, Effector selection, authorized indications, and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, and reduced facial definition or firmness.

Results vary with the individual, treatment settings, treatment plan, and operator technique. The system is not a substitute for surgery.

Tekniske specifikationer

Specifikation	Detaljer
RF type	Monopolær RF
Frekvenser	2 MHz og 6,78 MHz
Maksimal RF-output ved nominel belastning	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Maksimal RF-output ved referencebelastning	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
RF udgangsniveauer	1–10
Behandlingsmåder	Shallow, Middle, and Deep
Shot interval settings	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1–3
Internal cooling	Luftkøling
Vise	10,1 tommer LCD touchskærm
Dimensioner	389 mm B × 856,4 mm L × 1604,1 mm H
Vægt	47 kg
Elektrisk klassificering	Klasse I, type BF anvendt del
Strømforsyning	Enfaset AC 100–120 V, 50/60 Hz
Strømforbrug	1 kVA
RF aktivering	Håndstykke fingerkontakt eller fodkontakt
Behandlingselektrode	Disposable Effector
Patienten går rundt	Disposable patient return pad

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

Training and support

Video training and supporting documentation cover system setup, Effector replacement, patient return pad connection, treatment settings, ICD cooling, and impedance synchronization. Materials also address operating precautions, cleaning, maintenance, and basic troubleshooting.

Operators should review the supplied documentation and complete the required training before using the equipment.

The machine comes with a one-year warranty and lifetime remote technical support. Remote assistance is available for setup, operating questions, troubleshooting, and maintenance. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch.

Shipping costs, delivery options, and trade terms depend on your destination and order configuration. ICD cooling medium may require separate shipping arrangements or may be restricted by the carrier. These details will be confirmed before the order is finalized.

Ofte stillede spørgsmål

How many Effectors come with the machine?

The standard package includes 40 Effectors: 10 each of Effector 05, 10, 40, and 60.

How much do replacement Effectors cost?

Reference prices are USD 400 for four Effectors and USD 600 for eight. Contact us to confirm current pricing and shipping costs.

Are the patient return pads reusable?

No. They are disposable and intended for single use. Five pads are included with the machine. A replacement pack of 30 pads has a reference price of USD 150.

Can you ship the cooling medium to my country?

Availability depends on the destination and carrier requirements. The standard allocation is four 800 ml bottles where shipping is permitted. We will confirm the arrangement before you place your order.

Are training and manuals included?

Yes. Video training and operating documentation are included, covering setup, operation, treatment settings, maintenance, and basic troubleshooting.

Can I order consumables later?

Yes. Replacement Effectors, disposable patient return pads, and other compatible consumables are available for ongoing supply.

Do you offer OEM branding or distributor options?

OEM branding, bulk orders, and distributor cooperation are available on request. Minimum order quantities, pricing, configuration, and regional arrangements depend on the project.

How is shipping calculated?

Shipping is quoted according to the destination, package details, carrier, and delivery terms. Cooling medium may require a separate arrangement.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and expected order quantity.

Your quotation will confirm the machine configuration, included consumables, replacement prices, cooling-medium availability, shipping terms, training, and warranty coverage. For OEM or distributor inquiries, include your branding requirements and target market.

Request Pricing and Shipping Details

Contact Us on WhatsApp