Sistema RF monopolare a doppia frequenza XERF

6.78 MHz and 2 MHz monopolar RF for professional use

XERF is a non-invasive monopolar RF system with three thermal diffusion modes for different treatment areas and tissue thicknesses. It combines Wave Fit multi-pulse delivery, impedance synchronization, surface-temperature monitoring, and adjustable ICD cooling.

The standard package includes four Effector sizes, with 40 Effectors in total, plus patient return pads, video training, and operating documentation.

Come funziona

Monopolar RF delivers electrical energy from a treatment electrode through the tissue to a patient return electrode. Tissue resistance converts this energy into heat, which can produce collagen contraction and support subsequent tissue remodelling.

Skin thickness, tissue composition, and contours vary across the face and neck. XERF uses two frequencies and three selectable modes to adjust thermal diffusion to the treatment area.

For a broader look at RF technology, read our monopolar RF vs bipolar RF comparison.

Modalità	Frequenza RF	Relative thermal diffusion	Considerazioni sul trattamento
Poco profondo	6,78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Mezzo	6,78 MHz	Moderare	Trattamento generale del viso e del collo
Profondo	6,78 MHz seguito da 2 MHz	Deepest of the three modes	Lower face, jawline, submental area, and thicker tissue

Practitioners select the mode according to the patient’s anatomy, skin condition, medical history, and treatment goals.

Four disposable Effectors

Effettore	Contact dimensions	Massima energia RF	Conteggio dei colpi	Typical application
Effettore 05	5×10 mm	18,7 J	600	Small, narrow treatment areas
Effettore 10	10×10 mm	38,1 J	600	Aree facciali piccole o curve
Effettore 40	20×20 mm	140 J	600	Copertura generale del viso e del collo
Effettore 60	20×30 mm	220 J	600	Larger areas or thicker tissue

The Effectors use a spider-pattern electrode designed to distribute energy across the contact surface and reduce concentration at the edges. Proper skin contact must be maintained during RF delivery.

Effector selection depends on the area’s size, contours, and tissue thickness. Shot count alone does not indicate treatment energy; contact size, pulse energy, accumulated energy, and treatment mode also matter.

Treatment areas and objectives

Potential treatment areas include the forehead, periorbital and perioral regions, cheeks, lower face, jawline, jowls, submental area, and neck. Treatment must follow the device’s authorized indications and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, reduced elasticity, and loss of facial definition.

Some patients may notice early firmness, with further changes developing over the following weeks and months. Results vary with skin condition, treatment settings, operator technique, and the treatment plan. XERF is not a substitute for surgery and does not produce surgical facelift results.

Research background

Histological research cited by Lutronic reports collagen changes in the dermis and deeper subcutaneous tissue, including changes toward the deep fascial or SMAS region, following combined 6.78 MHz and 2 MHz RF application. These observations do not guarantee a specific treatment depth or clinical result for every patient.

---

Perché RF a doppia frequenza?

Le tradizionali piattaforme RF monopolari funzionano comunemente a una singola frequenza, creando un profilo termico relativamente fisso.

Tuttavia, l’anatomia del viso e del corpo non è uniforme. La fronte, le guance, la mascella, il collo, l'addome e le cosce differiscono in:

• Spessore della pelle
• Densità del tessuto connettivo
• Distribuzione del grasso sottocutaneo
• Contorni della superficie
• Impedenza elettrica
• Profondità di trattamento richiesta

Different treatment areas vary in tissue thickness and contours. Combining 6.78 MHz and 2 MHz gives practitioners more options for adjusting energy delivery to these differences.

Shallow and Middle modes use 6.78 MHz with different settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence. The resulting heating pattern depends on pulse timing, energy output, Effector design, cooling, and tissue characteristics—not frequency alone.

For a closer look at the technology, read how 6.78 MHz and 2 MHz dual-frequency monopolar RF works.

---

Treatment process

1. Consultazione: Assess skin condition, tissue thickness, medical history, previous procedures, contraindications, and treatment goals.
2. Preparazione: Clean the area, position the patient return pad, and apply the required coupling medium according to the operator’s manual.
3. Parameter selection: Choose the Effector, treatment mode, output level, cooling level, shot interval, and activation method.
4. Impedance synchronization: Establish proper contact and complete synchronization before delivering RF energy.
5. Trattamento: Maintain full Effector contact while monitoring skin response, patient comfort, temperature, and delivered energy.
6. Post-treatment assessment: Remove the coupling medium, assess the skin, and provide aftercare instructions.

A typical facial treatment may take approximately 15–30 minutes. Duration varies with the treatment area, Effector, settings, and number of shots.

Many treatments can be performed without anesthesia, although comfort management should be determined by the practitioner. Temporary redness, warmth, swelling, or sensitivity may occur. Patients can generally resume daily activities shortly afterward, subject to their skin response and aftercare instructions.

The number of sessions should be determined during consultation.

For further reading on treatment planning, see our dual-frequency monopolar RF protocol and safety guide. Always follow the operator’s manual for your specific device.

Specifiche tecniche

Specifica	Dettagli
Tipo RF	Rf monopolare
Frequenze	2 MHz e 6,78 MHz
Uscita RF massima al carico nominale	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Uscita RF massima al carico di riferimento	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
Livelli di uscita RF	1–10
Modalità di trattamento	Shallow, Middle, and Deep
Consegna di energia	Erogazione multi-impulso Wave Fit
Intervalli di ripresa	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1–3
Internal cooling	Raffreddamento d'aria
Display	Touchscreen LCD da 10,1 pollici
Dimensioni	389 mm L × 856,4 mm L × 1604,1 mm A
Peso	47 chilogrammi
Classificazione elettrica	Parte applicata di Classe I, Tipo BF
Alimentazione elettrica	CA monofase 100–120 V, 50/60 Hz
Consumo energetico	1kVA
Attivazione RF	Interruttore manuale o interruttore a pedale del manipolo
Elettrodo di trattamento	Disposable Effector
Il paziente va in giro	Disposable patient return pad

With the shot interval set to Off, each activation delivers one RF shot.

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

What’s included

Articolo	Quantità
Dual-frequency monopolar RF main unit	1
Effettore 05	10
Effettore 10	10
Effettore 40	10
Effettore 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Incluso
Operating manuals and treatment guidance	Incluso

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and compatible consumables are available for ongoing supply.

When budgeting for an RF system, consider ongoing consumable costs alongside the purchase price. Our monopolar RF machine cost and clinic ROI guide provides a starting point for assessing the investment.

Compare RF platforms

Comparing equipment for your clinic? Our XERF vs Thermage guide covers energy delivery, cooling, treatment tips, and purchasing considerations.

For a comparison of dual-frequency and single-frequency systems, read XERF vs Volnewmer, which examines RF technology, treatment workflow, and operating costs.

Training and warranty

Video training and documentation cover setup, Effector replacement, return pad connection, treatment settings, cooling, impedance synchronization, cleaning, maintenance, and basic troubleshooting.

The machine includes a one-year warranty and lifetime remote technical support. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch. Shipping costs, delivery options, and trade terms depend on the destination and order configuration.

Cooling-medium shipment is subject to carrier and destination restrictions. Availability and any separate shipping arrangements will be confirmed before the order is finalized.

Professional-use requirements

The system must be operated by trained professionals following the operator’s manual and an assessment of patient suitability.

It must not be used on patients with a cardiac pacemaker, an implantable cardioverter-defibrillator, or other implanted electrical devices. Review the manual for the complete contraindications, warnings, and precautions before treatment.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and order quantity. We will confirm the configuration, consumable pricing, cooling-medium availability, shipping terms, and warranty coverage.

OEM branding, bulk orders, and distributor options are available on request. Include your branding requirements and target market for a project-specific quotation.

---

Domande frequenti

Cos'è XERF?

XERF è un sistema RF monopolare non invasivo che combina le frequenze 6,78 MHz e 2 MHz per creare modalità di diffusione termica superficiale, media e profonda.

In che modo XERF è diverso dalla RF monopolare convenzionale?

Le piattaforme convenzionali utilizzano comunemente una frequenza RF. XERF utilizza 6,78 MHz e 2 MHz, consentendo al professionista di selezionare diverse profondità di diffusione termica in base all'area da trattare e alle caratteristiche del tessuto.

Come funziona la modalità Profonda?

La modalità profonda fornisce 6,78 MHz e 2 MHz in sequenza, creando la diffusione termica più profonda tra le tre modalità disponibili.

XERF raggiunge lo SMAS?

La ricerca istologica ufficiale citata da Lutronic ha riportato cambiamenti del collagene che si estendono verso la regione fasciale profonda o SMAS dopo l'applicazione combinata di RF a 6,78 MHz e 2 MHz. La distribuzione effettiva dell'energia dipende dai parametri selezionati e dalle caratteristiche individuali del tessuto.

XERF è doloroso?

I pazienti generalmente avvertono calore durante il trattamento. Wave Fit Pulse e il raffreddamento ICD sono progettati per ridurre il disagio e controllare il riscaldamento della superficie. La sensibilità individuale varia.

È necessaria l'anestesia?

Molti trattamenti possono essere eseguiti senza anestesia. Il professionista dovrebbe determinare l’approccio appropriato alla gestione del comfort per ciascun paziente.

Quanto dura il trattamento?

Un trattamento tipico dura circa 15-30 minuti. La durata del trattamento varia in base alla zona e al numero di iniezioni.

C'è qualche tempo di inattività?

XERF non è invasivo e generalmente richiede tempi di inattività minimi o non significativi. Possono verificarsi arrossamenti temporanei, calore, gonfiore o sensibilità.

Quando si possono vedere i risultati?

Alcuni pazienti potrebbero notare una fermezza precoce dopo il trattamento. Un miglioramento progressivo può svilupparsi nelle settimane e nei mesi successivi mentre continua il rimodellamento del collagene.

Quanti trattamenti sono necessari?

Il numero appropriato di trattamenti dipende dalle condizioni della pelle, dal grado di lassità, dall'area da trattare e dagli obiettivi clinici. Un medico qualificato dovrebbe raccomandare un piano di trattamento personalizzato.

Quale effettore dovrebbe essere utilizzato?

Effector selection depends on the size, contour, and thickness of the treatment area. XERF provides 5 × 10 mm, 10 × 10 mm, 20 × 20 mm and 20 × 30 mm options.

600 scatti sono sempre equivalenti tra diversi sistemi RF?

No. Il solo conteggio delle iniezioni non determina l'energia totale del trattamento. Dovrebbero essere considerati anche la dimensione dell'effettore, l'energia dell'impulso, la profondità, il livello di uscita e l'energia erogata accumulata.

I pazienti possono tornare alle attività quotidiane dopo il trattamento?

La maggior parte dei pazienti può tornare alle normali attività subito dopo il trattamento, in base alla risposta cutanea individuale e alle istruzioni del medico.

XERF è sicuro?

XERF incorporates impedance synchronization, surface-temperature monitoring, adjustable RF levels, three-level ICD cooling, and system alerts to support controlled treatment. The system must be operated by appropriately trained professionals according to the operator’s manual.

---

Informazioni importanti sulla sicurezza

XERF deve essere utilizzato da professionisti qualificati dopo aver esaminato la storia medica del paziente e l’idoneità al trattamento.

Il sistema non deve essere utilizzato su pazienti con:

• Un pacemaker cardiaco
• Un defibrillatore cardioverter impiantabile automatico
• Altri dispositivi elettrici impiantati

Ulteriori controindicazioni, avvertenze e precauzioni contenute nel manuale operativo ufficiale devono essere esaminate prima del trattamento.

Treatment controls

Choose from Shallow, Middle, and Deep modes, with 10 RF output levels and three ICD cooling settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence.

The 10.1-inch touchscreen displays tip-surface temperature, pulse energy, accumulated energy, and shot count. Treatment can be activated using the handpiece finger switch or foot switch.

Caratteristica	Configurazione
Tecnologia RF	Radifrequenza monopolare
Frequenze	6,78 MHz e 2 MHz
Modalità di trattamento	Shallow, Middle, and Deep
Deep-mode delivery	Sequenziale 6,78 MHz e 2 MHz
Uscita RF	Levels 1–10
Consegna di energia	Erogazione multi-impulso Wave Fit
Raffreddamento	Raffreddamento ICD a tre livelli
Impedance function	Sincronizzazione dell'impedenza in tempo reale
Monitoraggio	Tip-surface temperature, pulse energy, accumulated energy, and shot count
Display	Touchscreen LCD da 10,1 pollici
Activation	Interruttore manuale o interruttore a pedale del manipolo

What’s included

Articolo	Quantità
Dual-frequency monopolar RF main unit	1
Effettore 05	10
Effettore 10	10
Effettore 40	10
Effettore 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Incluso
Operating manuals and treatment guidance	Incluso

The package contains 40 Effectors in total. Cooling-medium shipment depends on the destination and carrier restrictions. We will confirm availability and shipping arrangements before you finalize your order.

Quattro dimensioni di effettori

Select the Effector according to the treatment area, tissue thickness, anatomical contours, and planned settings.

Effettore	Contact dimensions	Massima energia RF	Conteggio dei colpi	Typical application
Effettore 05	5×10 mm	18,7 J	600	Small, narrow treatment areas
Effettore 10	10×10 mm	38,1 J	600	Aree facciali piccole o curve
Effettore 40	20×20 mm	140 J	600	Copertura generale del viso e del collo
Effettore 60	20×30 mm	220 J	600	Larger areas or thicker tissue

When comparing RF systems, consider contact size, pulse energy, accumulated energy, and treatment mode alongside shot count.

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and other compatible consumables are available for ongoing supply.

All prices are in USD and subject to confirmation when quoted. Shipping, import charges, and local taxes are excluded unless stated in your quotation.

Ask About Consumable Supply

Modalità di trattamento

The three modes provide different thermal diffusion profiles. Practitioners can adjust the mode, Effector, output level, and cooling setting following an individual assessment.

Modalità	Frequenza	Relative thermal diffusion	Considerazioni sul trattamento
Poco profondo	6,78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Mezzo	6,78 MHz	Moderare	Trattamento generale del viso e del collo
Profondo	6,78 MHz seguito da 2 MHz	Highest of the three modes	Lower face, jawline, submental area, and thicker tissue

Aree di trattamento

Potential treatment areas include the forehead, cheeks, perioral area, lower face, jawline, jowls, submental area, and neck. Use depends on practitioner assessment, Effector selection, authorized indications, and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, and reduced facial definition or firmness.

Results vary with the individual, treatment settings, treatment plan, and operator technique. The system is not a substitute for surgery.

Specifiche tecniche

Specifica	Dettagli
Tipo RF	Rf monopolare
Frequenze	2 MHz e 6,78 MHz
Uscita RF massima al carico nominale	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Uscita RF massima al carico di riferimento	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
Livelli di uscita RF	1–10
Modalità di trattamento	Shallow, Middle, and Deep
Shot interval settings	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1–3
Internal cooling	Raffreddamento d'aria
Display	Touchscreen LCD da 10,1 pollici
Dimensioni	389 mm L × 856,4 mm L × 1604,1 mm A
Peso	47 chilogrammi
Classificazione elettrica	Parte applicata di Classe I, Tipo BF
Alimentazione elettrica	CA monofase 100–120 V, 50/60 Hz
Consumo energetico	1kVA
Attivazione RF	Interruttore manuale o interruttore a pedale del manipolo
Elettrodo di trattamento	Disposable Effector
Il paziente va in giro	Disposable patient return pad

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

Training and support

Video training and supporting documentation cover system setup, Effector replacement, patient return pad connection, treatment settings, ICD cooling, and impedance synchronization. Materials also address operating precautions, cleaning, maintenance, and basic troubleshooting.

Operators should review the supplied documentation and complete the required training before using the equipment.

The machine comes with a one-year warranty and lifetime remote technical support. Remote assistance is available for setup, operating questions, troubleshooting, and maintenance. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch.

Shipping costs, delivery options, and trade terms depend on your destination and order configuration. ICD cooling medium may require separate shipping arrangements or may be restricted by the carrier. These details will be confirmed before the order is finalized.

Domande frequenti

How many Effectors come with the machine?

The standard package includes 40 Effectors: 10 each of Effector 05, 10, 40, and 60.

How much do replacement Effectors cost?

Reference prices are USD 400 for four Effectors and USD 600 for eight. Contact us to confirm current pricing and shipping costs.

Are the patient return pads reusable?

No. They are disposable and intended for single use. Five pads are included with the machine. A replacement pack of 30 pads has a reference price of USD 150.

Can you ship the cooling medium to my country?

Availability depends on the destination and carrier requirements. The standard allocation is four 800 ml bottles where shipping is permitted. We will confirm the arrangement before you place your order.

Are training and manuals included?

Yes. Video training and operating documentation are included, covering setup, operation, treatment settings, maintenance, and basic troubleshooting.

Can I order consumables later?

Yes. Replacement Effectors, disposable patient return pads, and other compatible consumables are available for ongoing supply.

Do you offer OEM branding or distributor options?

OEM branding, bulk orders, and distributor cooperation are available on request. Minimum order quantities, pricing, configuration, and regional arrangements depend on the project.

How is shipping calculated?

Shipping is quoted according to the destination, package details, carrier, and delivery terms. Cooling medium may require a separate arrangement.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and expected order quantity.

Your quotation will confirm the machine configuration, included consumables, replacement prices, cooling-medium availability, shipping terms, training, and warranty coverage. For OEM or distributor inquiries, include your branding requirements and target market.

Request Pricing and Shipping Details

Contact Us on WhatsApp