Accessoires

  • ✓ Direct usine
  • ✓ Inspection avant expédition & Essai
  • ✓ Formation des opérateurs & Protocoles
  • ✓ Garantie 1 an + Assistance à distance à vie
  • ✓ Pièces de rechange & Assistance réparation
  • ✓ Assistance OEM/Distributeur

Professional Aesthetic Machine Accessories & Consommables
Find replacement cartridges, treatment tips, conductive gels, protective membranes, handpiece probes, needle modules, pads, solutions, and other accessories for professional aesthetic equipment.
Compare compatibility, package quantity, intended use, and replacement requirements before ordering. Mico Aes supports single-unit purchasing, bulk orders, and pre-order compatibility checks for clinics, salons, distributors, and equipment owners.

Professional Aesthetic Machine Accessories & Consommables

Browse replacement parts, treatment cartridges, conductive products and consumables for RF, HIFU, cryolipolysis, laser, microneedling, hydro facial, EMS and pelvic-floor systems. Because connectors, dimensions and operating specifications may differ between machine models, confirm compatibility before placing an order.
View Accessories Check Compatibility

Shop Accessories by Equipment Type

RF Machine Accessories

Grounding pads, conductive RF gel and model-specific treatment cartridges for compatible monopolar, bipolar and body-contouring RF systems. View RF Accessories

Cartouches HIFU

Replaceable MPT HIFU cartridges in different treatment depths. Cartridge type, connector, line mode and shot capacity must match the host machine. View HIFU Cartridges

Cryolipolysis Consumables

Anti-freeze membranes used between the skin and compatible cryolipolysis applicators. Check pad dimensions, liquid content and package quantity. View Cryolipolysis Supplies

Laser Handpiece Probes

Interchangeable probes for selected picosecond or Nd:YAG laser handpieces. Wavelength marking alone does not confirm compatibility. View Laser Probes

Microneedling & Plasma Parts

Single-use needle cartridges, roller accessories and replacement treatment components for compatible microneedling, Hydra Injector and fusion plasma systems. View Needle Accessories

Hydro Facial Solutions

Water-based treatment solutions and related consumables for selected hydrodermabrasion systems. Confirm reservoir compatibility and the permitted solution type. View Facial Consumables

Pads EMS & Applicateurs

Contact pads and applicator accessories for compatible EMS facial and body systems. Verify connector type, pad dimensions and whether the product is reusable or disposable. View EMS Accessories

Pelvic-Floor Accessories

Training cushions and compatible accessories for selected EMS body sculpting and pelvic-floor stimulation platforms. View Pelvic Accessories

Accessory Types at a Glance

Accessory Type Compatible Equipment What to Verify Replacement Pattern
Grounding pads Selected monopolar RF systems Machine model, connector, pad size and permitted use Model and protocol dependent
Conductive gel RF, cavitation and compatible ultrasound systems Ingredients, viscosity, package size and device instructions Consumed during treatments
HIFU cartridges Compatible MPT HIFU platforms Depth, connector, line mode and shot capacity Replace at the specified shot limit
RF treatment tips Compatible Volnewmer-style systems I/F/V type, shot allowance and host-machine compatibility Replace when shots are exhausted
Anti-freeze membranes Cryolipolysis machines Dimensions, liquid volume and applicator coverage Single treatment use
Laser tip probes Selected pico and Nd:YAG handpieces Thread, handpiece model, optical configuration and wavelength Replace if damaged or configuration changes
Needle cartridges Microneedling and Hydra Injector devices Pen model, locking interface, pin count and sterility Single client and single session
Facial solutions Compatible hydrodermabrasion systems Formula, bottle size, reservoir and local-use requirements Consumed during treatments

Product names may identify compatible machine families, but they do not automatically establish affiliation with or authorization from a third-party brand. Contact Mico Aes with your machine model and accessory photos before ordering.

Accessoires

12 résultats affichésTrié par popularité

How to Choose the Correct Machine Accessory

A similar appearance or product name does not guarantee that an accessory will fit your equipment. Connectors, software recognition, electrical ratings, cartridge locks, handpiece threads and treatment dimensions may vary between models and production generations.

1. Identify the Host Machine

Record the manufacturer, exact model, serial label, purchase year and software or hardware version where available.

2. Photograph the Connection

Provide clear photos of the original accessory, connector, socket, locking mechanism and any printed part number.

3. Confirm the Specification

Check dimensions, treatment depth, pin count, shot capacity, wavelength, material, package quantity and permitted operating conditions.

4. Confirm Disposable Status

Determine whether the item is single-use, single-client, reusable or replaceable after a defined number of shots.

5. Review Local Requirements

Confirm whether topical products, sterile needle modules or treatment-related consumables require specific documentation in your destination market.

6. Request Written Confirmation

Ask the supplier to confirm compatibility and included quantity on the quotation or proforma invoice before payment.

Available Accessory Categories

RF Grounding Pads & Gel conducteur

Electrical grounding pads support the return path required by selected monopolar RF systems. Conductive gel supports contact between the treatment applicator and skin where required by the device protocol. Confirm whether your equipment requires a grounding pad, its connector type and the approved contact medium. Never substitute an incompatible pad or gel solely because it looks similar.

Cartouches MPT HIFU

Available cartridge depths include 1.5 mm, 2.0 mm, 3.0 mm, 4.5 mm, 6.0 mm, 9.0 mm and 13.0 mm. Availability does not mean every depth is compatible with every machine or appropriate for every treatment area. Verify the host model, cartridge interface, treatment mode and stated shot capacity before ordering.

Volnewmer I, F & V Tips

Model-specific RF cartridges may differ by treatment shape, intended treatment area and shot allowance. The listed I, F and V tips are described as providing up to 1,200 shots each. Confirm machine recognition, connector design and the selected tip type before purchase.

Cryolipolysis Anti-Freeze Membranes

Anti-freeze membranes create a protective interface between the skin and cooling applicator. Correct coverage and adequate membrane condition are essential parts of the operating protocol. Do not reuse a membrane or replace it with an unverified cosmetic wipe. Follow the host machine instructions and practitioner safety protocol.

Pico Laser Handpiece Probes

Laser probes are optical components rather than universal cosmetic accessories. Compatibility depends on the handpiece construction, wavelength path, thread and optical alignment. Installation and output verification should be performed by qualified personnel. A probe label alone does not verify delivered wavelength or treatment performance.

Microneedling & Plasma Accessories

Needle modules and roller accessories must match the applicable device interface. Sterile, single-use products should remain sealed until the treatment and must not be shared or reprocessed. Check pin count, needle configuration, locking style, lot information and packaging integrity.

EMS Facial Gel Pads

Contact pads support consistent contact between compatible EMS facial applicators and the treatment surface. Pad material, dimensions and connector arrangement are model dependent. Replace pads when adhesion, conductivity or physical integrity no longer meets the equipment instructions.

Hydro Facial Solutions

Hydro facial solutions are consumable liquids used with compatible hydrodermabrasion reservoirs and treatment protocols. Bottle size and formulation should be confirmed before ordering. Do not place oils, concentrated acids or unapproved liquids into a machine unless the manufacturer specifically permits them.

Pelvic-Floor Training Cushions

Pelvic-floor cushions are designed for selected EMS Shape Neo and EMSlim configurations. A compatible host system and the correct cable or control interface may be required. Confirm whether the listing includes only the cushion or additional cables and control components.

Consumables, Replaceable Parts and Reusable Accessories

Classification Exemples Purchasing Consideration
Single-use consumables Needle cartridges and anti-freeze membranes Packaging integrity, quantity, sterility and expiry information
Treatment-consumed products Conductive gel and hydro facial solutions Volume, ingredients, storage and device compatibility
Shot-limited cartridges HIFU cartridges and selected RF tips Shot capacity, counter recognition and replacement cost
Reusable contact accessories EMS pads and pelvic-floor cushions Cleaning protocol, wear, cable condition and replacement interval
Service replacement parts Laser probes and selected plasma accessories Installation, calibration and qualified technical support

Compatibility Information to Send Before Ordering

Machine Information

  • Manufacturer and exact model name
  • Machine serial label
  • Purchase year or production version
  • Input voltage where relevant
  • Software or system version

Accessory Information

  • Original part number or label
  • Connector and socket photos
  • Physical dimensions
  • Required quantity or package size
  • Destination country and intended professional setting

For the fastest compatibility check, send photos of the host machine, original accessory, connector and serial label in one inquiry.

Safety, Storage and Replacement

Inspect Before Use

Do not use accessories with damaged packaging, cracked connectors, exposed wiring, contaminated contact surfaces or missing identification.

Follow the Device Manual

Use the host machine’s operating instructions for installation, disinfection, compatible materials and replacement intervals.

Protect Optical Components

Laser probes and other optical parts should be stored in clean, protective packaging and inspected by qualified personnel after impact or damage.

Track Consumable Lots

Clinics should record lot numbers, receipt dates and applicable expiry information for sterile or topical consumables.

Topical products, pain-relief preparations and invasive consumables may be regulated differently by country. Verify product labeling, practitioner permissions and local requirements before purchasing or using them.

Orders, Warranty and Technical Support

Selected accessories are available from one unit or one listed package. Quantity, production time and shipping method depend on the specific product and destination.

Compatibility Check

Mico Aes can review machine labels, connector photos and accessory specifications before the order is finalized.

24/7 Technical Support

Remote technical assistance is available for compatibility, installation and basic troubleshooting questions.

Conditions de garantie

Standard machine coverage is one year for the main unit and six months for eligible handpieces. Disposable products, consumables and normal wear parts are generally not covered unless a confirmed manufacturing defect applies.

Foire aux questions

How do I know whether an accessory fits my machine?
Send the exact machine model, serial-label photo, original accessory photo and clear images of both the connector and socket. Compatibility should be confirmed before payment.
Are these accessories universal?
No. Many accessories look similar but use different connectors, dimensions, electrical specifications, optical structures or software recognition systems.
What is the minimum order quantity?
The standard minimum is one listed unit or package. Some consumables are sold in fixed packs, so the number of individual pieces depends on the product listing.
Can I reuse microneedling cartridges?
Sterile microneedling cartridges are intended for single-client, single-session use. They should not be cleaned, reprocessed or shared.
Can cryolipolysis membranes be reused?
No. A membrane should be used for one treatment only and replaced with a new, intact membrane for the next treatment.
Are all conductive gels suitable for RF and cavitation?
Not automatically. Check the host machine instructions and confirm the required conductivity, viscosity and ingredient restrictions.
How often should HIFU cartridges be replaced?
Replacement depends on the cartridge’s stated shot capacity and operating condition. Stop using a cartridge that is damaged, leaking or producing system errors.
Does a laser probe need professional installation?
Laser optical components should be installed and checked by qualified personnel. Output and alignment should be verified before clinical operation.
Are disposable accessories covered by the machine warranty?
Consumables, disposable products and normal wear items are generally excluded from the main machine warranty. Confirm the applicable terms for the specific item before ordering.
Can I request bulk or distributor pricing?
Yes. Provide the product names, quantities, destination and expected reorder frequency to request a volume quotation.
Can accessories from third-party-branded machines be supplied?
Compatibility may be available for selected machine families, but it must be verified individually. A compatibility reference does not imply affiliation with or authorization from the trademark owner.
What should I do if I am unsure which part to buy?
Do not order based only on appearance. Contact Mico Aes with your machine information and accessory photos for a pre-order check.

Request an Accessory Compatibility Check

Send your machine model, serial-label photo, connector images, required quantity and destination country. We will help identify the closest compatible accessory or explain which additional measurements are needed.
Browse Accessories Check Compatibility & Obtenez un devis
Panier
Défiler vers le haut