XERF Çift Frekanslı Monopolar RF Sistemi

6.78 MHz and 2 MHz monopolar RF for professional use

XERF is a non-invasive monopolar RF system with three thermal diffusion modes for different treatment areas and tissue thicknesses. It combines Wave Fit multi-pulse delivery, impedance synchronization, surface-temperature monitoring, and adjustable ICD cooling.

The standard package includes four Effector sizes, with 40 Effectors in total, plus patient return pads, video training, and operating documentation.

Nasıl çalışır?

Monopolar RF delivers electrical energy from a treatment electrode through the tissue to a patient return electrode. Tissue resistance converts this energy into heat, which can produce collagen contraction and support subsequent tissue remodelling.

Skin thickness, tissue composition, and contours vary across the face and neck. XERF uses two frequencies and three selectable modes to adjust thermal diffusion to the treatment area.

For a broader look at RF technology, read our monopolar RF vs bipolar RF comparison.

Moda	RF frekansı	Relative thermal diffusion	Treatment considerations
Sığ	6.78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Orta	6.78 MHz	Ilıman	Genel yüz ve boyun bakımı
Derin	6,78 MHz ve ardından 2 MHz	Deepest of the three modes	Lower face, jawline, submental area, and thicker tissue

Practitioners select the mode according to the patient’s anatomy, skin condition, medical history, and treatment goals.

Four disposable Effectors

Efektör	Contact dimensions	Maksimum RF enerjisi	Şut sayısı	Typical application
Efektör 05	5 × 10mm	18,7J	600	Small, narrow treatment areas
Efektör 10	10 × 10 mm	38,1J	600	Küçük veya kavisli yüz bölgeleri
Efektör 40	20 × 20 mm	140J	600	Genel yüz ve boyun kapsama alanı
Efektör 60	20 × 30 mm	220J	600	Larger areas or thicker tissue

The Effectors use a spider-pattern electrode designed to distribute energy across the contact surface and reduce concentration at the edges. Proper skin contact must be maintained during RF delivery.

Effector selection depends on the area’s size, contours, and tissue thickness. Shot count alone does not indicate treatment energy; contact size, pulse energy, accumulated energy, and treatment mode also matter.

Treatment areas and objectives

Potential treatment areas include the forehead, periorbital and perioral regions, cheeks, lower face, jawline, jowls, submental area, and neck. Treatment must follow the device’s authorized indications and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, reduced elasticity, and loss of facial definition.

Some patients may notice early firmness, with further changes developing over the following weeks and months. Results vary with skin condition, treatment settings, operator technique, and the treatment plan. XERF is not a substitute for surgery and does not produce surgical facelift results.

Research background

Histological research cited by Lutronic reports collagen changes in the dermis and deeper subcutaneous tissue, including changes toward the deep fascial or SMAS region, following combined 6.78 MHz and 2 MHz RF application. These observations do not guarantee a specific treatment depth or clinical result for every patient.

---

Neden Çift Frekanslı RF?

Geleneksel monopolar RF platformları genellikle tek bir frekansta çalışarak nispeten sabit bir termal profil oluşturur.

Ancak yüz ve vücut anatomisi aynı değildir. Alın, yanaklar, çene çizgisi, boyun, karın ve uyluklar şu şekilde farklılık gösterir:

• Cilt kalınlığı
• Bağ dokusu yoğunluğu
• Deri altı yağ dağılımı
• Yüzey konturları
• Elektrik empedansı
• Gerekli tedavi derinliği

Different treatment areas vary in tissue thickness and contours. Combining 6.78 MHz and 2 MHz gives practitioners more options for adjusting energy delivery to these differences.

Shallow and Middle modes use 6.78 MHz with different settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence. The resulting heating pattern depends on pulse timing, energy output, Effector design, cooling, and tissue characteristics—not frequency alone.

For a closer look at the technology, read how 6.78 MHz and 2 MHz dual-frequency monopolar RF works.

---

Treatment process

1. Danışma: Assess skin condition, tissue thickness, medical history, previous procedures, contraindications, and treatment goals.
2. Hazırlık: Clean the area, position the patient return pad, and apply the required coupling medium according to the operator’s manual.
3. Parameter selection: Choose the Effector, treatment mode, output level, cooling level, shot interval, and activation method.
4. Impedance synchronization: Establish proper contact and complete synchronization before delivering RF energy.
5. Tedavi: Maintain full Effector contact while monitoring skin response, patient comfort, temperature, and delivered energy.
6. Post-treatment assessment: Remove the coupling medium, assess the skin, and provide aftercare instructions.

A typical facial treatment may take approximately 15–30 minutes. Duration varies with the treatment area, Effector, settings, and number of shots.

Many treatments can be performed without anesthesia, although comfort management should be determined by the practitioner. Temporary redness, warmth, swelling, or sensitivity may occur. Patients can generally resume daily activities shortly afterward, subject to their skin response and aftercare instructions.

The number of sessions should be determined during consultation.

For further reading on treatment planning, see our dual-frequency monopolar RF protocol and safety guide. Always follow the operator’s manual for your specific device.

Teknik özellikler

Şartname	Detaylar
RF türü	Monopolar RF
Frekanslar	2 MHz ve 6,78 MHz
Nominal yükte maksimum RF çıkışı	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Referans yükte maksimum RF çıkışı	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
RF çıkış seviyeleri	1–10
Tedavi modları	Shallow, Middle, and Deep
Enerji dağıtımı	Wave Fit çoklu darbe iletimi
Çekim aralıkları	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1-3
Internal cooling	Hava soğutma
Görüntülemek	10,1 inç LCD dokunmatik ekran
Boyutlar	389 mm G × 856,4 mm U × 1604,1 mm Y
Ağırlık	47 kg
Elektriksel sınıflandırma	Sınıf I, Tip BF uygulamalı parça
Güç kaynağı	Tek fazlı AC 100–120 V, 50/60 Hz
Güç tüketimi	1kVA
RF aktivasyonu	El aleti parmak anahtarı veya ayak anahtarı
Tedavi elektrodu	Disposable Effector
Hasta etrafta dolaşıyor	Disposable patient return pad

With the shot interval set to Off, each activation delivers one RF shot.

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

What’s included

Öğe	Miktar
Dual-frequency monopolar RF main unit	1
Efektör 05	10
Efektör 10	10
Efektör 40	10
Efektör 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Dahil
Operating manuals and treatment guidance	Dahil

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and compatible consumables are available for ongoing supply.

When budgeting for an RF system, consider ongoing consumable costs alongside the purchase price. Our monopolar RF machine cost and clinic ROI guide provides a starting point for assessing the investment.

Compare RF platforms

Comparing equipment for your clinic? Our XERF vs Thermage guide covers energy delivery, cooling, treatment tips, and purchasing considerations.

For a comparison of dual-frequency and single-frequency systems, read XERF vs Volnewmer, which examines RF technology, treatment workflow, and operating costs.

Training and warranty

Video training and documentation cover setup, Effector replacement, return pad connection, treatment settings, cooling, impedance synchronization, cleaning, maintenance, and basic troubleshooting.

The machine includes a one-year warranty and lifetime remote technical support. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch. Shipping costs, delivery options, and trade terms depend on the destination and order configuration.

Cooling-medium shipment is subject to carrier and destination restrictions. Availability and any separate shipping arrangements will be confirmed before the order is finalized.

Professional-use requirements

The system must be operated by trained professionals following the operator’s manual and an assessment of patient suitability.

It must not be used on patients with a cardiac pacemaker, an implantable cardioverter-defibrillator, or other implanted electrical devices. Review the manual for the complete contraindications, warnings, and precautions before treatment.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and order quantity. We will confirm the configuration, consumable pricing, cooling-medium availability, shipping terms, and warranty coverage.

OEM branding, bulk orders, and distributor options are available on request. Include your branding requirements and target market for a project-specific quotation.

---

Sık sorulan sorular

XERF nedir?

XERF, Sığ, Orta ve Derin termal difüzyon modları oluşturmak için 6,78 MHz ve 2 MHz frekanslarını birleştiren, invaziv olmayan bir monopolar RF sistemidir.

XERF'nin geleneksel monopolar RF'den farkı nedir?

Geleneksel platformlar genellikle bir RF frekansı kullanır. XERF, 6,78 MHz ve 2 MHz kullanır ve uygulayıcının tedavi alanı ve doku özelliklerine göre farklı termal difüzyon derinliklerini seçmesine olanak tanır.

Derin mod nasıl çalışır?

Derin mod, sırasıyla 6,78 MHz ve 2 MHz sunarak mevcut üç mod arasında en derin termal difüzyonu oluşturur.

XERF SMAS'a ulaşıyor mu?

Lutronic tarafından alıntı yapılan resmi histolojik araştırma, kombine 6,78 MHz ve 2 MHz RF uygulamasının ardından derin fasiyal veya SMAS bölgesine doğru uzanan kollajen değişiklikleri bildirdi. Gerçek enerji dağılımı seçilen parametrelere ve bireysel doku özelliklerine bağlıdır.

XERF ağrılı mıdır?

Hastalar genellikle tedavi sırasında sıcaklık hissederler. Wave Fit Pulse ve ICD soğutma, rahatsızlığı azaltmak ve yüzey ısınmasını kontrol etmek için tasarlanmıştır. Bireysel duyarlılık farklılık gösterir.

Anestezi gerekli mi?

Pek çok tedavi anestezi olmadan yapılabilmektedir. Uygulayıcı her hasta için uygun konfor yönetimi yaklaşımını belirlemelidir.

Tedavi ne kadar sürer?

Tipik bir tedavi yaklaşık 15-30 dakika sürer. Tedavi süresi bölgeye ve atış sayısına göre değişmektedir.

Herhangi bir kesinti var mı?

XERF invaziv değildir ve genellikle çok az kesinti gerektirir veya hiç önemli bir kesinti gerektirmez. Geçici kızarıklık, sıcaklık, şişlik veya hassasiyet oluşabilir.

Sonuçlar ne zaman görülebilir?

Bazı hastalar tedaviden sonra erken sertlik fark edebilir. Kollajenin yeniden yapılanması devam ettikçe ilerleyen haftalar ve aylar boyunca aşamalı iyileşme gelişebilir.

Kaç tedavi gereklidir?

Uygun tedavi sayısı cildin durumuna, gevşekliğin derecesine, tedavi alanına ve klinik hedeflere bağlıdır. Nitelikli bir uygulayıcı kişiselleştirilmiş bir tedavi planı önermelidir.

Hangi Efektör kullanılmalı?

Effector selection depends on the size, contour, and thickness of the treatment area. XERF provides 5 × 10 mm, 10 × 10 mm, 20 × 20 mm and 20 × 30 mm options.

Farklı RF sistemleri arasında 600 çekim her zaman eşdeğer midir?

Hayır. Atım sayısı tek başına toplam tedavi enerjisini belirlemez. Efektör boyutu, darbe enerjisi, derinlik, çıkış seviyesi ve iletilen toplam enerji de dikkate alınmalıdır.

Hastalar tedavi sonrasında günlük aktivitelerine dönebilir mi?

Çoğu hasta, bireysel cilt tepkilerine ve uygulayıcının talimatlarına bağlı olarak tedaviden kısa süre sonra normal aktivitelerine dönebilir.

XERF güvenli midir?

XERF incorporates impedance synchronization, surface-temperature monitoring, adjustable RF levels, three-level ICD cooling, and system alerts to support controlled treatment. The system must be operated by appropriately trained professionals according to the operator’s manual.

---

Önemli Güvenlik Bilgileri

XERF, hastanın tıbbi geçmişi ve tedaviye uygunluğu incelendikten sonra eğitimli profesyoneller tarafından ameliyat edilmelidir.

Sistem aşağıdaki hastalarda kullanılmamalıdır:

• Bir kalp pili
• Otomatik implante edilebilir kardiyoverter-defibrilatör
• Diğer implante edilmiş elektrikli cihazlar

Tedaviden önce resmi kullanıcı kılavuzundaki ek kontrendikasyonlar, uyarılar ve önlemler gözden geçirilmelidir.

Treatment controls

Choose from Shallow, Middle, and Deep modes, with 10 RF output levels and three ICD cooling settings. Deep mode delivers 6.78 MHz followed by 2 MHz in sequence.

The 10.1-inch touchscreen displays tip-surface temperature, pulse energy, accumulated energy, and shot count. Treatment can be activated using the handpiece finger switch or foot switch.

Özellik	Yapılandırma
RF teknolojisi	Monopolar radyofrekans
Frekanslar	6,78 MHz ve 2 MHz
Tedavi modları	Shallow, Middle, and Deep
Deep-mode delivery	Sıralı 6,78 MHz ve 2 MHz
RF output	Levels 1–10
Enerji dağıtımı	Wave Fit çoklu darbe iletimi
Soğutma	Üç seviyeli ICD soğutma
Impedance function	Gerçek zamanlı empedans senkronizasyonu
İzleme	Tip-surface temperature, pulse energy, accumulated energy, and shot count
Görüntülemek	10,1 inç LCD dokunmatik ekran
Activation	El aleti parmak anahtarı veya ayak anahtarı

What’s included

Öğe	Miktar
Dual-frequency monopolar RF main unit	1
Efektör 05	10
Efektör 10	10
Efektör 40	10
Efektör 60	10
Disposable patient return pads	5
ICD cooling medium	Four 800 ml bottles, where shipping is permitted
Video training	Dahil
Operating manuals and treatment guidance	Dahil

The package contains 40 Effectors in total. Cooling-medium shipment depends on the destination and carrier restrictions. We will confirm availability and shipping arrangements before you finalize your order.

Dört Efektör boyutu

Select the Effector according to the treatment area, tissue thickness, anatomical contours, and planned settings.

Efektör	Contact dimensions	Maksimum RF enerjisi	Şut sayısı	Typical application
Efektör 05	5 × 10mm	18,7J	600	Small, narrow treatment areas
Efektör 10	10 × 10 mm	38,1J	600	Küçük veya kavisli yüz bölgeleri
Efektör 40	20 × 20 mm	140J	600	Genel yüz ve boyun kapsama alanı
Efektör 60	20 × 30 mm	220J	600	Larger areas or thicker tissue

When comparing RF systems, consider contact size, pulse energy, accumulated energy, and treatment mode alongside shot count.

Replacement consumables

Consumable	Reference price
4 replacement Effectors	USD 400
8 replacement Effectors	USD 600
30 disposable patient return pads	USD 150

Patient return pads are for single use only. Replacement Effectors, return pads, and other compatible consumables are available for ongoing supply.

All prices are in USD and subject to confirmation when quoted. Shipping, import charges, and local taxes are excluded unless stated in your quotation.

Ask About Consumable Supply

Tedavi modları

The three modes provide different thermal diffusion profiles. Practitioners can adjust the mode, Effector, output level, and cooling setting following an individual assessment.

Moda	Sıklık	Relative thermal diffusion	Treatment considerations
Sığ	6.78 MHz	Lowest of the three modes	Thin, narrow, or delicate areas
Orta	6.78 MHz	Ilıman	Genel yüz ve boyun bakımı
Derin	6,78 MHz ve ardından 2 MHz	Highest of the three modes	Lower face, jawline, submental area, and thicker tissue

Tedavi alanları

Potential treatment areas include the forehead, cheeks, perioral area, lower face, jawline, jowls, submental area, and neck. Use depends on practitioner assessment, Effector selection, authorized indications, and local requirements.

Treatment objectives may include improving the appearance of mild to moderate skin laxity, fine lines, and reduced facial definition or firmness.

Results vary with the individual, treatment settings, treatment plan, and operator technique. The system is not a substitute for surgery.

Teknik özellikler

Şartname	Detaylar
RF türü	Monopolar RF
Frekanslar	2 MHz ve 6,78 MHz
Nominal yükte maksimum RF çıkışı	2 MHz: 150 W at 200 Ω; 6.78 MHz: 140 W at 200 Ω
Referans yükte maksimum RF çıkışı	2 MHz: 129 W at 100 Ω; 6.78 MHz: 125 W at 100 Ω
RF çıkış seviyeleri	1–10
Tedavi modları	Shallow, Middle, and Deep
Shot interval settings	Off, 200 ms, 500 ms, or 800 ms
ICD cooling levels	1-3
Internal cooling	Hava soğutma
Görüntülemek	10,1 inç LCD dokunmatik ekran
Boyutlar	389 mm G × 856,4 mm U × 1604,1 mm Y
Ağırlık	47 kg
Elektriksel sınıflandırma	Sınıf I, Tip BF uygulamalı parça
Güç kaynağı	Tek fazlı AC 100–120 V, 50/60 Hz
Güç tüketimi	1kVA
RF aktivasyonu	El aleti parmak anahtarı veya ayak anahtarı
Tedavi elektrodu	Disposable Effector
Hasta etrafta dolaşıyor	Disposable patient return pad

Specifications may differ by device version and market configuration. Confirm the final specification sheet before ordering.

Training and support

Video training and supporting documentation cover system setup, Effector replacement, patient return pad connection, treatment settings, ICD cooling, and impedance synchronization. Materials also address operating precautions, cleaning, maintenance, and basic troubleshooting.

Operators should review the supplied documentation and complete the required training before using the equipment.

The machine comes with a one-year warranty and lifetime remote technical support. Remote assistance is available for setup, operating questions, troubleshooting, and maintenance. Warranty coverage, exclusions, replacement parts, and service procedures follow the terms supplied with your order.

Inspection and shipping

Each machine is inspected and tested before dispatch.

Shipping costs, delivery options, and trade terms depend on your destination and order configuration. ICD cooling medium may require separate shipping arrangements or may be restricted by the carrier. These details will be confirmed before the order is finalized.

Sık sorulan sorular

How many Effectors come with the machine?

The standard package includes 40 Effectors: 10 each of Effector 05, 10, 40, and 60.

How much do replacement Effectors cost?

Reference prices are USD 400 for four Effectors and USD 600 for eight. Contact us to confirm current pricing and shipping costs.

Are the patient return pads reusable?

No. They are disposable and intended for single use. Five pads are included with the machine. A replacement pack of 30 pads has a reference price of USD 150.

Can you ship the cooling medium to my country?

Availability depends on the destination and carrier requirements. The standard allocation is four 800 ml bottles where shipping is permitted. We will confirm the arrangement before you place your order.

Are training and manuals included?

Yes. Video training and operating documentation are included, covering setup, operation, treatment settings, maintenance, and basic troubleshooting.

Can I order consumables later?

Yes. Replacement Effectors, disposable patient return pads, and other compatible consumables are available for ongoing supply.

Do you offer OEM branding or distributor options?

OEM branding, bulk orders, and distributor cooperation are available on request. Minimum order quantities, pricing, configuration, and regional arrangements depend on the project.

How is shipping calculated?

Shipping is quoted according to the destination, package details, carrier, and delivery terms. Cooling medium may require a separate arrangement.

Request an itemized quote

Send us your destination country, business type, treatment requirements, and expected order quantity.

Your quotation will confirm the machine configuration, included consumables, replacement prices, cooling-medium availability, shipping terms, training, and warranty coverage. For OEM or distributor inquiries, include your branding requirements and target market.

Request Pricing and Shipping Details

Contact Us on WhatsApp