Fast-axis collimation (FAC) helps an 808 nm diode laser deliver more of its emitted light through the handpiece optics to the treatment window. It uses a high-numerical-aperture microlens positioned close to each diode bar to control the direction in which the beam spreads most rapidly.
An uncorrected diode beam can diverge by tens of degrees along its fast axis. A suitable FAC lens can reduce that divergence to a few milliradians, with some lenses offering optical transmission above 99% [1][2][3].
In a well-designed hair removal system, this can reduce optical losses and help the remaining optics produce a more even treatment spot. Treatment performance still depends on the complete system, including output energy, cooling, calibration, and treatment settings.
Why Diode Laser Beams Need Collimation
A laser diode has a thin, rectangular emitting region, so its beam spreads differently in two directions. Along the thin dimension, called the fast axis, divergence is typically around 30° to 45° at full width at half maximum (FWHM). Along the wider dimension, or slow axis, divergence is usually only a few degrees [1][3].
Diode bars contain multiple emitters arranged in a row. Small deviations from a straight emitter line, known as the “smile effect,” can make the combined beam harder to collimate [1][5].
Without adequate beam control, some light may fall outside the acceptance angle or aperture of downstream optics and be lost before reaching the treatment window [6]. Uneven energy distribution can also make the treatment spot harder to homogenize, while stray light absorbed by internal components can cause localized heating.
The power generated by the diode stack therefore differs from the energy delivered at the treatment window. Equipment comparisons need to account for both.
O que é tecnologia FAC?
FAC uses a precision microlens, typically an acylindrical lens, mounted close to the diode bar. The lens acts primarily in the fast-axis plane, reducing the beam’s divergence before it passes through the rest of the optical system [1][2].
Common specifications include the following [2][3][4]:
| Parâmetro | Especificação típica | Por que isso importa |
|---|---|---|
| Numerical aperture (NA) | Approximately 0.5 to 0.8 | Determines how much of the divergent light the lens can collect |
| Optical transmission | Up to or above 99%, depending on the lens and coating | Limits losses as light passes through the lens |
| Residual divergence | A few milliradians under suitable conditions | Helps the beam pass efficiently through downstream optics |
| Lens design | Acylindrical microlens | Provides collimation primarily along the fast axis |
| Effective focal length | Approximately 0.15 to 1.5 mm | Allows the lens to be positioned close to the diode bar |
An antireflection coating must be suitable for the operating wavelength. A coating specified for 790 to 990 nm, for example, covers 808 nm [2][3].
Published measurements of FAC-collimated diode bars report residual fast-axis divergence in the single-digit milliradian range [5]. Actual performance depends on the lens, diode bar geometry, and alignment.
How FAC Improves 808 nm Diode Laser Efficiency
More Light Reaches the Treatment Window
FAC reduces the amount of light that spreads beyond the usable aperture of the handpiece optics. This allows a larger share of the diode’s emitted power to reach the treatment window [1][6].
The improvement is in optical delivery efficiency. It does not, by itself, establish that the diode converts electrical power into light more efficiently.
The Beam Is Easier to Shape Into a Uniform Spot
Controlling fast-axis divergence makes it easier for a light guide or homogenizer to distribute energy across the treatment window [6].
FAC contributes to spot uniformity, but the final profile also depends on slow-axis beam control, the light guide and the rest of the optical design. A FAC lens alone does not guarantee a flat-top beam.
Less Stray Light Can Reduce Internal Heating
Light that misses the intended optical path may be absorbed by mounts or other components inside the handpiece. Better beam control can reduce this source of localized heating.
This may help reduce thermal stress, although component life also depends on cooling, materials, assembly quality and operating conditions. Any claim of longer service life should be supported by system-level testing.
Efficient Beam Collection Can Support a Compact Design
Capturing the beam close to the diode bar can give designers more flexibility when sizing downstream optics. Depending on the complete design, this may allow a smaller optical assembly.
Handpiece size and weight still depend on the diode stack, cooling components, housing and treatment window.
What FAC Can and Cannot Tell You About a Machine
FAC Does Not Change the Laser’s Wavelength
FAC does not change the absorption and scattering properties associated with 808 nm light in skin. Its role is to control beam divergence and improve energy delivery through the optical system [6].
A claim that FAC alone makes treatment penetrate deeper needs separate evidence. Better optical transmission does not automatically establish greater treatment depth.
FAC Is One Part of the System
A FAC lens cannot compensate for inadequate cooling, unstable output or poor calibration. When assessing a machine, review measured output at the treatment window, fluence accuracy, spot uniformity and cooling performance.
FAC Is Widely Used in the Laser Industry
FAC is an established beam-shaping technique used in high-power diode lasers, with lenses available from multiple specialist manufacturers [1][2][4].
Specific lens designs or integration methods may be proprietary or patented. The presence of FAC alone does not establish that a machine uses exclusive technology.
Integration quality matters: lens alignment, control of the smile effect, light-guide design and stability during repeated heating and cooling all affect performance.
FAC in Mico Aes 808 nm Diode Laser Systems
Nosso 808 nm diode laser hair removal machines use FAC optics at the start of the handpiece’s optical path. The collimated light then passes through a light guide to a cooled sapphire contact window.
According to our product specifications, supporting components include Mean Well power supplies, 500 W TEC semiconductor cooling and water tanks with capacities of 6 to 8 litres. These components form part of the system’s power and thermal management.
Our internal engineering tests indicate improved light-guide utilization and spot uniformity compared with the non-collimated configurations tested. Spot-profile images and the test method are available on request, so buyers can review the comparison conditions.
Mico Aes reports exports to more than 80 countries, CE compliance for its equipment, and ISO 13485 certification for its manufacturing quality management system. Ask for the documents applicable to the model you are considering, along with its technical specifications and test results.
What to Ask a Supplier About FAC
Before choosing a system, request the following information:
- Lens specifications. Ask for numerical aperture, transmission, and the antireflection coating range. The coating must cover the machine’s operating wavelength [2][3].
- Measured beam performance. Request residual divergence measurements or treatment-window spot profiles, including the test conditions.
- Smile control. Ask how deviations in the emitter line are measured and managed, since these can affect collimation [5].
- Stack warranty and shot rating. Confirm what the rating means, how it was tested, and what the warranty covers.
- Output verification. Request measured pulse energy or fluence at the treatment window, ideally supported by an independent report or a video showing the measurement setup.
For broader purchasing guidance, read how to choose a reliable diode laser hair removal machine. You can also compare diode laser and IPL devices or review laser hair removal profitability for salons and clinics.
To review a Mico Aes system, Contate-nos for datasheets, spot-profile images, and output test videos.
Perguntas frequentes
What does FAC stand for in diode lasers?
FAC stands for fast-axis collimation. It uses a microlens to reduce divergence along the direction in which a laser diode’s beam spreads most rapidly [1][2].
How does FAC improve the efficiency of an 808 nm diode laser?
FAC helps collect light that might otherwise miss downstream optics. This can increase the proportion of emitted power reaching the treatment window, support more uniform beam shaping and reduce stray-light heating inside the handpiece [1][3][6].
Is FAC technology patented or exclusive to one manufacturer?
FAC is a widely used optical technique supplied by multiple specialist manufacturers [1][4]. Individual lens designs or assembly methods may be protected by patents, but the use of FAC alone does not establish exclusivity.
Does FAC make treatment safer or increase penetration depth?
FAC can improve optical delivery and help the system produce a more uniform spot. It does not change the wavelength. Treatment safety and effectiveness still depend on fluence, pulse settings, skin assessment, cooling and operator technique [6].
What specifications should I look for in a FAC lens?
Review numerical aperture, transmission at the operating wavelength, and residual divergence. Published examples include an NA of approximately 0.8, transmission around 99% or higher, and milliradian-level residual divergence [2][3][5]. These figures should be assessed alongside alignment quality and measurements from the assembled system.
Referências
Ruida Aesthetic. What Is Fast-Axis Collimation (FAC)? Optical Efficiency and Spot Quality in Diode Laser Hair Removal Systems. Industry technical overview discussing the role and limitations of FAC. ruidaaesthetic.com, 2026.
RP Photonics Encyclopedia. Laser Diode Collimators. Covers FAC lenses for broad-area emitters and diode bars, including the smile effect. rp-photonics.com.
INGENERIC. Fast-Axis Collimation Optics. Product specifications covering an NA of 0.8, diffraction-limited collimation and transmission up to 99%. ingeneric.com.
Dayy Photonics. Fast Axis Collimation Lens. Specifications covering fast-axis divergence of 30° to 45° FWHM, an NA of 0.5 to 0.8, effective focal lengths of 0.15 to 1.5 mm, transmission above 99% and residual divergence of a few milliradians. dayyphotonics.com.
LIMO/Focuslight. Diode Laser Array Technology: Beam Shaping of High-Power Diode Lasers Using Micro-Optics. Technical white paper.
Zhang H, Hu Y, Peng S, Liu Y. “The SMILE Effect in the Beam Propagation Direction Affects the Beam Shaping of a Semiconductor Laser Bar Array.” Photonics. 2024;11(2):161. doi:10.3390/photonics11020161.



